Finally! Im starting my build !
#1
TECH Addict
Thread Starter
iTrader: (17)
Join Date: Jul 2007
Location: Texas
Posts: 2,498
Likes: 0
Received 0 Likes
on
0 Posts
Finally! Im starting my build !
I have wanted to build something since ive owned the car, but said i wouldn't until I blew it up. Well i didn't blow it up but my oil pressure has got me worried so what the hell its time!
Thanks to Zane, My block is in the shop getting boiled, bored and honed. Its going to be a 355 build with stock crank turned and balanced, stock rods and
Speed Pro, Power Forged Pistons all balanced with the crank.
Cam is the largest i can go and still pass emissions if your wondering ( I like to keep it legal) 223/230 .565/.565 112 LSA. - 1700-6100 RPM And here
Stock ported heads from Elliot Port Works LE2 Package
Manley 2.00/1.56 6000 series valves
PAC 1218 bee hive springs (145 lbs seat and 340 lbs open)
Steel retainers and locks
205 cc intake port
milling, cleaning and assembly
flow about 275/190 CFM
Im pretty sure im going with the CSR electric waterpump and CC gold series 1.6 rr's, Intake will be ported to match the heads and for a 58mm TB.
I still am in the process of picking out the right stall, I already have LT headers installed and poly mounts and 3:73's sitting in the garage along with MSD OTVC 8.5 wires. I pretty much have all suspension parts on the car except for SFC's which i will get after the install.
Im sure i will be adding more stuff in the near future, block is pretty much set in stone all i need to order is my pistons which i will do by the end of the week. Ill keep everyone posted on the progress and post up pics as the parts come in and i pick up the block ! !!!!!!! !!!
Thanks to Zane, My block is in the shop getting boiled, bored and honed. Its going to be a 355 build with stock crank turned and balanced, stock rods and
Speed Pro, Power Forged Pistons all balanced with the crank.
Cam is the largest i can go and still pass emissions if your wondering ( I like to keep it legal) 223/230 .565/.565 112 LSA. - 1700-6100 RPM And here
Stock ported heads from Elliot Port Works LE2 Package
Manley 2.00/1.56 6000 series valves
PAC 1218 bee hive springs (145 lbs seat and 340 lbs open)
Steel retainers and locks
205 cc intake port
milling, cleaning and assembly
flow about 275/190 CFM
Im pretty sure im going with the CSR electric waterpump and CC gold series 1.6 rr's, Intake will be ported to match the heads and for a 58mm TB.
I still am in the process of picking out the right stall, I already have LT headers installed and poly mounts and 3:73's sitting in the garage along with MSD OTVC 8.5 wires. I pretty much have all suspension parts on the car except for SFC's which i will get after the install.
Im sure i will be adding more stuff in the near future, block is pretty much set in stone all i need to order is my pistons which i will do by the end of the week. Ill keep everyone posted on the progress and post up pics as the parts come in and i pick up the block ! !!!!!!! !!!
Last edited by djjab57; 10-14-2009 at 10:25 AM.
#4
TECH Resident
iTrader: (108)
Not too hard to pass here if you know what you're doing. As long as it passes the sniffer they won't say anything about anything else.
Hey DJ do you already have the cam? I've got that exact same cam I'm about to put up for sale. Brand new in the box, just decided I need the money more than I need a cam right now. PM me if interested. Other than that it seems like you have the right idea as far as your build goes. Should make some good power and be a blast to drive.
Hey DJ do you already have the cam? I've got that exact same cam I'm about to put up for sale. Brand new in the box, just decided I need the money more than I need a cam right now. PM me if interested. Other than that it seems like you have the right idea as far as your build goes. Should make some good power and be a blast to drive.
#6
TECH Addict
Thread Starter
iTrader: (17)
Join Date: Jul 2007
Location: Texas
Posts: 2,498
Likes: 0
Received 0 Likes
on
0 Posts
Not too hard to pass here if you know what you're doing. As long as it passes the sniffer they won't say anything about anything else.
Hey DJ do you already have the cam? I've got that exact same cam I'm about to put up for sale. Brand new in the box, just decided I need the money more than I need a cam right now. PM me if interested. Other than that it seems like you have the right idea as far as your build goes. Should make some good power and be a blast to drive.
Hey DJ do you already have the cam? I've got that exact same cam I'm about to put up for sale. Brand new in the box, just decided I need the money more than I need a cam right now. PM me if interested. Other than that it seems like you have the right idea as far as your build goes. Should make some good power and be a blast to drive.
#7
TECH Addict
Thread Starter
iTrader: (17)
Join Date: Jul 2007
Location: Texas
Posts: 2,498
Likes: 0
Received 0 Likes
on
0 Posts
Well the block is about done and im pretty sure i have found my Rods and pistons, Looks like i will be going to a 6 inch Scat I beam rod with the forged Mahl pistons. Man i want to hurry this build up. Luckily here in Texas we have good driving weather 11 1/2 months out of the year. Now i am starting to concentrate on my heads and cam
Trending Topics
#16
TECH Addict
Thread Starter
iTrader: (17)
Join Date: Jul 2007
Location: Texas
Posts: 2,498
Likes: 0
Received 0 Likes
on
0 Posts
I have been emailing with Lloyd Elliot and will be sending the heads off to him next week and here is the cam we came up with or he came up with 226/232 .565/.565 112 LSA
Now im starting to get impatient and ready to get this all together Its a little bigger than his off the shelf emission cam
Now im starting to get impatient and ready to get this all together Its a little bigger than his off the shelf emission cam