95 LT1 TA going LQ9
#721
Is it making its way over to EFI Alchemy? I bet my friends in Orange Park would think I'm nuts if I went over there though, first time in a long time I've needed nothing but would want to go back anyway? I spend too much time over then when I'm up.
I am stopping by there tomorrow for Doc to flash my PCM for a start up tune....I will let you know when it hits the rollers so you can come check it out if you want! Looking for 700+ to the tires...
It's looking good! Also that air dam is awesome you sent to me, do I do anything special to put it on the car or just the stock bolts I have now?
I am stopping by there tomorrow for Doc to flash my PCM for a start up tune....I will let you know when it hits the rollers so you can come check it out if you want! Looking for 700+ to the tires...
It's looking good! Also that air dam is awesome you sent to me, do I do anything special to put it on the car or just the stock bolts I have now?
Thanks!
Thank you!
Here is an update...
Wideband, boost gauge, mini alternator, 2 bar map sensor, fuel system have all been ordered... Car should be up and running by next weekend and ready to be tuned...
I also made some custom head covers and installed my manual boost controller.. here are some pics
#723
Thanks Merv! a couple of the are still a little singed...i am going to buy a few new connectors and pin them in... but there is only a coule that is even noticable now with the TPS and IAC and IAT moved... gonna order som more mesh loom too at some point!
#730
According to my tuner (Doc @ EFI Alchemy) They will easily handle 17psi so that is what I went with!
LOL It has evaolved a lot since the "budget build" was started!!
the LT1 build I did seems like ages ago... so much has changed! Small world. lol those scorpions had less than 30mins on them when I sold them!! Glad they found a good home!
LOL It has evaolved a lot since the "budget build" was started!!
the LT1 build I did seems like ages ago... so much has changed! Small world. lol those scorpions had less than 30mins on them when I sold them!! Glad they found a good home!
#735
TECH Fanatic
iTrader: (26)
Join Date: Mar 2010
Location: Milledgeville, GA
Posts: 1,909
Likes: 0
Received 0 Likes
on
0 Posts
Congratulations on firing it off Matt!! I hope it lasts longer than this build thread has. lol
Anyone looking to do a LT1--->LSx conversion please check out my for sale thread.
Anyone looking to do a LT1--->LSx conversion please check out my for sale thread.
#736
#737
Lol well the build thread has bled out for a while but with all the issues I dealt with and how much work has gone into it from pulling the initial lt1 motor to finally starting the LS turbo motor I think I made pretty good time!
I'm gonna finish up some loose ends this weekend and then finish the tune so I can get some dyno numbers and track times..
I'm gonna finish up some loose ends this weekend and then finish the tune so I can get some dyno numbers and track times..