New PB at Bandimere!
04-20-2011, 09:01 PM
#1
12 Second Club
Thread Starter
iTrader: (15)
Join Date: Mar 2007
Location: Cheyenne, Wy
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
New PB at Bandimere! 12.992 @ 110.63 with a 2.1 60ft.
Still trying to find out what the D/A was today, but it was fairly low I am sure...temp was low but humidity was kinda up...we ended up getting rained out after I made 3 passes.
Still trying to find out what the D/A was today, but it was fairly low I am sure...temp was low but humidity was kinda up...we ended up getting rained out after I made 3 passes.
Trending Topics
04-21-2011, 12:04 PM
#8
12 Second Club
Thread Starter
iTrader: (15)
Join Date: Mar 2007
Location: Cheyenne, Wy
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
I was not at Pinks...Was not set up to run there yet.
I am on the 10-bolt still, I was just leaving easier...I have the stock 3.42's back in it and a Zexel carrier with the TA Girdle...no I didnt pay extra for these parts, the guy had them lying around and hooked me up lol.
I was not using my 2-step to launch this time, I was just feathering the clutch a little bit for those first 3 runs. I was in line to do my 4th run after running the 12.99 and I was going to use the 2-step set at 4700 rpms, but it started raining while I was in the staging line so that kindof didnt happen.
Next time I go to the track I will get an easy launch or two, then try it with the 2-step...
The 8.8 is still in progress. When the government shutdown was imminent, being that I am in the military, we were told we werent receiving a paycheck so I had the guy temporarily stop building the rear end for fear that I would not be able to pay him. Now that we are golden for a little while, I told him to go ahead and finish it but he had already started another project so I have to wait for him to finish that one first lol.
I can't wait till it is in tho!
I am on the 10-bolt still, I was just leaving easier...I have the stock 3.42's back in it and a Zexel carrier with the TA Girdle...no I didnt pay extra for these parts, the guy had them lying around and hooked me up lol.
I was not using my 2-step to launch this time, I was just feathering the clutch a little bit for those first 3 runs. I was in line to do my 4th run after running the 12.99 and I was going to use the 2-step set at 4700 rpms, but it started raining while I was in the staging line so that kindof didnt happen.
Next time I go to the track I will get an easy launch or two, then try it with the 2-step...
The 8.8 is still in progress. When the government shutdown was imminent, being that I am in the military, we were told we werent receiving a paycheck so I had the guy temporarily stop building the rear end for fear that I would not be able to pay him. Now that we are golden for a little while, I told him to go ahead and finish it but he had already started another project so I have to wait for him to finish that one first lol.
I can't wait till it is in tho!
