Idle clip before new muffler.
#1
Idle clip before new muffler.
I figured I would post up a small idle clip of my car before I put the new muffler I ordered on.
Right now the exhaust is dumped before axel with a summit bullet muffler. At idle it sounds good but at wot its just too raspy and doesnt have a good tone.
I ordered this muffler called a powerstick. So im gonma do away with the summit bullet and put the powerstick in its place. Hopefully it has a better tone.
Anyway here is my current set up.
http://www.youtube.com/watch?v=VWWB2Lxlvyo
Right now the exhaust is dumped before axel with a summit bullet muffler. At idle it sounds good but at wot its just too raspy and doesnt have a good tone.
I ordered this muffler called a powerstick. So im gonma do away with the summit bullet and put the powerstick in its place. Hopefully it has a better tone.
Anyway here is my current set up.
http://www.youtube.com/watch?v=VWWB2Lxlvyo
#2
I would look into the Dynomax Bullets in a larger configuration. I believe the most common is a 16". Unfortunatly no matter how you look at it its going to be very loud and likely raspy due to using a bullet or powerstick vs an actual muffler.
#5
I got the powerstick in the mail. Im probably gonna have it put on saturday so I will make sure to post a video as soon as it gets done.
Im really hoping this makes a difference. Im not so much worried about the idle difference as I am the wot difference. This bullet muffler thats on now at wot just has no good tone to it at all. Almost like no muffler at all.
Im really hoping this makes a difference. Im not so much worried about the idle difference as I am the wot difference. This bullet muffler thats on now at wot just has no good tone to it at all. Almost like no muffler at all.
#6
Similar - but quite different. The GMMG mufflers did not have any 3" core versions. The 3026SB he is going to install has very different characteristics than other "chambered" mufflers. Trust me.