skinnies

iTrader: (33)

After collecting a lot of dust in the engine bay, the motor finally went in tonight. I still need to polish the valve covers when they come back off to final adjust the rockers, and of course clean everything once it gets in(looks horrible right now, and gotta love the foot print, lol). Oh and yes the motor is completely wired up and vacuum lines ran.

Bad93TA

iTrader: (2)

looks good man, awesome job. keep up the good work

streetassasin

iTrader: (30)

badass what numbers and track times you shootin for?

skinnies

iTrader: (33)

Hopefully it'll go somewhere in the high 9's at 140+ mph on the 17's Then I'll drive it all over on the street and probably put 150+ miles on it each week, pure street car.

BOLO

iTrader: (40)

WOW, thats nice! another BOOSTED LT1! Keep us updated w/the set up!

N20Dave

iTrader: (7)

Looks great. I like the turbo mounting location and the exhaust routing.

bowtie9696

So are you bringing both headers together behind the motor, up the passenger side to the turbo, and then exhausting down the drivers side or am I missing something?

RealQuick

iTrader: (14)

Both headers go back, merge near the starter, then a single 3" pipe runs up front under the pass. side motor mount.

Ralls

iTrader: (32)

High 9's? Ehhh.. What suspension mods do you have? You probably have the power but not hookup. I guess you can prove me wrong. That would be sick though. I have no idea what power or time's I'll get. As long as it's fast is all I care.

What fans are those? Will they fit the stock radiator?

RealQuick

iTrader: (14)

He'll get there no problem. Stalled TH400, good suspension and tire... no problem.

Ponyhntr

iTrader: (9)

He will most likely be proving you wrong. One thing I'll give Justin credit for is that he know's how to get a car to hook. When he can get a bolt-on LS1 car to pull the 17" SS wheels off the ground on a drag radial, he know's what he's doing.

Ralls

iTrader: (32)

Well ****, if he hits high 9's, I wonder what I'll get. Cause I have the same setup + more

jessedale98

iTrader: (16)

haha Ralls, I like your style.

sbcgenII

iTrader: (1)

Nice! WIll have to check it out at the shootout if you are there.

ScreaminRedZ

iTrader: (3)

Mmmm, looks like fast! Make sure you get some street racing vids!

skinnies

iTrader: (33)

On the track the car will hook no problem, my cars usually like to HOOK. My ls1 car pulled the front heavy 17's about a foot at the track and that was on a 275/40/17 mt drag radial on the rear. This setup should go 1.5x 60ft's NO problem.

Ralls

iTrader: (32)

Sweet. Make sure you get good video of that beast.

James Montigny

iTrader: (13)

Clean those valve covers man LOL
I spent a good hour hand polishing them before dropping them off.


Lookin' good, can't wait to see it run.

Usually not a problem for Skinnies. He's the king of video footage.

flyinZ

iTrader: (15)

VERY clean, Skinny..Me like

Did you fab up your relocation bracket for you alternator? Would ya like to make another for some cash? : Im wantin' one...

skinnies

iTrader: (33)

MuscleCar Specialties a local shop fabbed it up, PM me and I'll get you more information.

James, the valve covers are now polished.