TwoFast

iTrader: (23)

What is the thread size on the stick of the B&M???...my original shifter ball won't screw on there..I had the original shifter ball on the WS6 store short stick but the B&M seems to be a bigger thread size.....what size is it?

LSGunZ28

iTrader: (8)

The original Ball shifter DOES screw on, I believe.. .. I had a 2002 Z28.. It fit, but I went with a Hurst Shift ****...

wait, come to think of it, I may have not used the ball shifter on it.. So I may be mistaken..


Im unsure of the thread size, but I know a hurst shift ****, fits just right..

Z28M6TT

thread size is 16x1.5

the_merv

iTrader: (88)

From what I have read the stock Ball screws on..

NVR_SPDS

iTrader: (39)

I used a stock ball on a B&M Ripper i tried out one time. It threaded on just fine.

RAMPANT

iTrader: (17)

I had the stock Formula on mine for a while then switched to the "H" Hurst factory shift **** on it. Fit fine.

AFASTYZFR1

iTrader: (55)

I used my stock leather Hurst **** on mine

RsSean

iTrader: (27)

I have like 5 different stock thread *****. They all fit.
This may sound a bit weird but take it up to Lowes or home Depot and match the threads up and you will right away what threads they are. I think that will be the best way to find out.