Zerokube

iTrader: (4)

Was driving actually kinda slow and shifted like normal, went to put it into third and it went in but when i started accelerating it popped out of gear and made a weird noise. didn't do it since but was curious of what it might be. and usually grinds if i don't baby it into gear too btw.

calhoon

iTrader: (6)

If its not been rebuilt, its most likely a worn 3/4 shift fork. This is a well-documented concern.The fix is an iron fork.

BlackScreaminMachine

iTrader: (17)

Sounds like a broken trans. If its not holding 3rd by ifself then something is worn or broken, Like said I beleive it is the shift fork too.

ScreaminRedZ

iTrader: (3)

Could also be broken struts in the synchro.

PewterScreaminMach

iTrader: (7)

x4 on these.

_JB_

iTrader: (33)

I had the same problem. You have a rebuild in your near future.

Zerokube

iTrader: (4)

its not a rebuilt one and this is the first time its happened in 3rd and hasnt done it since. i already planned on rebuilding it and obviously putting in a better clutch etc.. But i was just curious is to why it happened. Guess its the fork lol

Zerokube

iTrader: (4)

oh and it only grinds in 2nd

Black02SLPSS

iTrader: (5)

I had a problem similar to yours, and it ended up being that my pro 5.0 worked itself loose and was not getting it in gear all the way. This may or may not be your problem but its something easy to check.