Aftermarket T56 gears
#42
TECH Apprentice
Anytime you mix new with used gears, there's a chance of noisy operation but the Korean supplied gears tend to run noisy in general. Our stuff is throughly tested before it goes into production. We typically send 2-3 samples to our biggest builders for testing along with testing in house to compare results. Once we are satisfied with the results, the product goes into production. FWIW, we've scrapped a few projects because we weren't satisfied with the results of the product.
#43
TECH Fanatic
iTrader: (2)
Anytime you mix new with used gears, there's a chance of noisy operation but the Korean supplied gears tend to run noisy in general. Our stuff is throughly tested before it goes into production. We typically send 2-3 samples to our biggest builders for testing along with testing in house to compare results. Once we are satisfied with the results, the product goes into production. FWIW, we've scrapped a few projects because we weren't satisfied with the results of the product.
#44
If wanting to run twin discs, will a stock input shaft work, or are the longer splines necessary?
#47
Staging Lane
Join Date: Mar 2011
Location: Warshington
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts