SmokinZed

It has progressively gotten a little less smooth shifting to second. It still goes without a problem but now I hear a big clunk each time I shift into second when the car is cold. Its loud enough to hear outside of the car in just a big clunk, no grinding whatsoever.

Anyone have any idea what it maybe?

SilverGhost

iTrader: (53)

when do you hear the clunk? right as you release the clutch pedal after making the shift?

if so, what rearend do you have. when i had a detroit locker in my 9" it did that every damn time, not anymore since changing to a spool.

SmokinZed

Right as I put the shifter into second. Doesnt matter what position the clutch is in. I have a Moser 12 bolt.

king690

i just recently started having the exactly the same problem. so if anone could help it would be very much appreciated

No Juice

iTrader: (11)

What torque arm are you using?

I've had that problem ever since I installed a Spohn tunnel mount design

99Ws6TransAm

iTrader: (43)

check your torque arm...if its not tight..the rear end is making the clunk when your engaging a gear..but the arm is moving

skippytheloon

iTrader: (14)

Mine did that, checked the torque arm first. Turned out to be my Borla and no matter how I adjusted it I couldn't get it to not hit. Yanked that crap off for duals and no more clunk!

GuitsBoy

iTrader: (4)

Ive had that problem since new. Hasnt affected anything, and It only happens once in a while.