M6 to A4 and A4 to M6 Conversion info requested
11-05-2008, 11:52 AM
#503
^^There is one on the Brake Petal too that you will see, it's to dis-engage Lockup on the Convertor when you hit the Brakes. The other one on that Switch is for the Brake Lights, and the little single Switch is to dis-engage the Cruise Control.
I removed that stuff, the N/S Switch on my Car will be on the Clutch. I had to bypass it all with the Auto to get the Starter Wire to work, for some reason the LT1 N/S wiring wasn't working with my LSX Harness. Someone had messed with it before I got in there and messed it up.
I removed that stuff, the N/S Switch on my Car will be on the Clutch. I had to bypass it all with the Auto to get the Starter Wire to work, for some reason the LT1 N/S wiring wasn't working with my LSX Harness. Someone had messed with it before I got in there and messed it up.
Last edited by the_merv; 01-27-2009 at 05:37 AM.
11-09-2008, 06:15 PM
#506
TECH Apprentice
iTrader: (11)
Join Date: May 2007
Location: se michigan
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
I'm going to be doing a M6 swap on my a4 trans am. I am buying the transmission from my friends z28 with the T56. He is going to a TH400 w/ slapstick. So he is willing to give me all the parts I need for the conversion as long as he doesn't need them for his new TH400. My question is we can just switch pedals right? Also what hidden expenses are there that am not thinking of??? I'm buying the trans and shifter for $1,200. What else will i need besides: Fluid and Flashing the PCM.
11-09-2008, 07:27 PM
#508
TECH Apprentice
iTrader: (11)
Join Date: May 2007
Location: se michigan
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
yeah I thought so.... I did some more reading and I guess I can follow one of the guides on the wire harness?? So i can use my auto wire harness and still have everything work correctly.
12-18-2008, 12:30 AM
#511
It will be a Pink Wire.
I used the Wire that was there that would normally power the 4L60E. It's not pinned from the Computer, it's on one of the Wheel Well Connectors, it comes from the Fuse Box. It will be the Wire that powers all the Auto Trans stuff if you look it up on a Pin Diagram. That is the one that I spliced to power the Reverse Lights, and the Reverse Lockout.
I used the Wire that was there that would normally power the 4L60E. It's not pinned from the Computer, it's on one of the Wheel Well Connectors, it comes from the Fuse Box. It will be the Wire that powers all the Auto Trans stuff if you look it up on a Pin Diagram. That is the one that I spliced to power the Reverse Lights, and the Reverse Lockout.
02-14-2009, 06:03 PM
#512
TECH Regular
iTrader: (2)
Join Date: Oct 2003
Location: valley forge PA
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
anyone have the wiring on a LT1 correct I have the needed pigtails for a A4-M6 swap on my LT1 but I can't figure out which wire goes to which side of the pigtails as they are the same color wire and don't have any marking that is refered to repeatedly in the common directions as either "A or B" so what do I do to figure this out.. Anyone have a photo or wiring diagram online?
02-20-2009, 05:57 PM
#513
Here are some pics I found..
Reverse Lockout..
One wire goes to a 12v source, and the other goes to the Pin on the PCM Connectors that controls Reverse Lockout.
Reverse Lights..
One wire goes to a 12v source and the other is going to the Reverse Lights.
Reverse Lockout..
One wire goes to a 12v source, and the other goes to the Pin on the PCM Connectors that controls Reverse Lockout.
Reverse Lights..
One wire goes to a 12v source and the other is going to the Reverse Lights.
Last edited by the_merv; 02-22-2009 at 04:08 PM.
02-25-2009, 08:48 PM
#514
12 Second Club
iTrader: (16)
Join Date: Jul 2006
Location: Atascocita Tx
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Anybody know of any better write ups than the one on page one? It seems good but u know any others that have the pictures with the txt so u can see what their talkin about when their talkin about it?