Anyone else afraid of their Pro 5.0 shifter?
03-31-2005, 12:30 AM
#1
On The Tree
Thread Starter
Join Date: Aug 2004
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Anyone else afraid of their Pro 5.0 shifter? ok remembering back to last time i drove my car...
i have a pro 5.0 with a chopped stick and ive money shifted it 3 or 4 times.
i didnt break anything, but it still scared the crap out of me.
can anyone shift their pro 5.0 from 3rd to 4th FAST without grabbing your shifter backwards with your thumb down?
anyone with a T-handle B&M on top of their pro 5.0?
ive just got a standard **** but im wondering if the T-handle would get your arm close enough to the right position.
my car should be done soon, and i dont want to mess it up- grabbing the shifter backwards is not natural and i forgot a couple of times when it counted.
any input?
i have a pro 5.0 with a chopped stick and ive money shifted it 3 or 4 times.
i didnt break anything, but it still scared the crap out of me.
can anyone shift their pro 5.0 from 3rd to 4th FAST without grabbing your shifter backwards with your thumb down?
anyone with a T-handle B&M on top of their pro 5.0?
ive just got a standard **** but im wondering if the T-handle would get your arm close enough to the right position.
my car should be done soon, and i dont want to mess it up- grabbing the shifter backwards is not natural and i forgot a couple of times when it counted.
any input?
03-31-2005, 02:08 AM
#4
TECH Addict
iTrader: (28)
Join Date: Sep 2002
Location: Central Texas
Posts: 2,170
Likes: 0
Received 0 Likes
on
0 Posts
The 3-4 shift? That's the easiest shift on my car, even easier than the 1-2 shift. The 2-3 is the one that needs some practice to bring my times down at the strip. To get the 3-4 down, just pull straight back and it should fall right into place with the Pro 5.0.
03-31-2005, 02:30 AM
#5
11 Second Club
iTrader: (4)
Join Date: Jan 2005
Location: Rowletts,KY
Posts: 1,004
Likes: 0
Received 0 Likes
on
0 Posts
I agree, I have missed 4th more that any other gear. However If you think about it and practice some it comes natural. I have a small ball( off of a snapper riding mower) and a custome short stick. I hate the factory or these big *** ***** you can buy aftermarket.
03-31-2005, 07:53 AM
#6
TECH Fanatic
iTrader: (16)
Join Date: Oct 2003
Location: Ruffin,N.C.
Posts: 1,456
Likes: 0
Received 0 Likes
on
0 Posts
Soooo, you prefer small ***** over big ones huh?
j/k . a friend of mine has a hurst shifter in his w/ the small ball and i hate it. It feels like it is going to slip out of my hand. I like the factory hurst handle the best.
j/k . a friend of mine has a hurst shifter in his w/ the small ball and i hate it. It feels like it is going to slip out of my hand. I like the factory hurst handle the best. Trending Topics
03-31-2005, 03:09 PM
#9
TECH Regular
Join Date: Sep 2004
Location: Deployed
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DMNSPD
I'm not quite sure I follow this... Grabbing shifter backwards? Thumb down?
I run the stock Hurst **** with my Pro 5.0 and UMI stick. Very simple.
I run the stock Hurst **** with my Pro 5.0 and UMI stick. Very simple.
03-31-2005, 03:50 PM
#11
Staging Lane
Join Date: Dec 2001
Location: oregon
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
I've done the 3->2 (crap!) misshift with the stock shifter before.. Its not pretty.
Afterwards, I got the Pro 5.0 shifter, and at least do the "elbow out" form to make sure this mistake never happens again. I definantly like how the 5.0 shifter feels over stock.. should have done it when I first got the car.
Regardless of shifter, the elbow out tech basically makes it almost impossible to stick it in 2nd
Afterwards, I got the Pro 5.0 shifter, and at least do the "elbow out" form to make sure this mistake never happens again. I definantly like how the 5.0 shifter feels over stock.. should have done it when I first got the car.
Regardless of shifter, the elbow out tech basically makes it almost impossible to stick it in 2nd
03-31-2005, 04:16 PM
#12
Launching!
Join Date: Aug 2004
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Or to not ever worry about going 3-2 you can do a 2nd gear lockout like what I have and as soon as you go to 3rd hit a button right below shift **** and it locks 2nd gear out so you absolutely cant go to 2nd and can only go straight down the 4th 
03-31-2005, 04:41 PM
#13
Originally Posted by 8-Pack
Put your elbow up and your forearm down, your palm is facing the passemger side of the car. dont know why but some people like to shift to 4th like that. I tried it and its not as uncomfortable as it sounds but I havent ever missed 4th so I just yank it back.
03-31-2005, 05:00 PM
#14
On The Tree
Join Date: Jan 2004
Location: state college PA
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 8-Pack
Put your elbow up and your forearm down, your palm is facing the passemger side of the car. dont know why but some people like to shift to 4th like that. I tried it and its not as uncomfortable as it sounds but I havent ever missed 4th so I just yank it back.
J/K
03-31-2005, 05:23 PM
#15
Originally Posted by flexybronc
Thats how i have had to start shifting my car so i dont miss 4th. With my hand on the driver side of the shift ****. Dont pay DMNSPD and attention he is just used to rowing on big ****'s that arnt his. haha J/K
J/K
I am 
03-31-2005, 08:25 PM
#16
Launching!
Join Date: Jul 2004
Location: knoxville tn
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
hell, i put hurst shifter in my 99 z28 and trying to pass car on the road and from top of 3rd into 2nd and foot to the floor. then 6 push rod had to be replaced!!!
03-31-2005, 10:08 PM
#19
TECH Enthusiast
Originally Posted by 00RedWs6
why doesnt everyone just do the 2nd gear lockouts and be done worry about the 3rd to 2nd shift?
Yeah some more info on this lockout . Were to get it price etc !
