zeus201

Thanks.

That's too bad Chris didn't call you back. FYI, their dyno does reads considerable low when compared to anything other dynos...

Mightymike2000ss

iTrader: (4)

what numbers does that cobra put down if you dont mind me asking

Camaro Z

iTrader: (5)

I'm pretty sure Ryan told me between 470 and 500 at the wheels, but correct me if I'm wrong.

Mightymike2000ss

iTrader: (4)

jesus those are pretty damn good numbers, i dont know if you guys ever seen that white 04 cobra that goes to hooters and autox everynow and then. but me and that guy got in to a battle on the interstate and he just tore me up.... it was bad

benji's_z28

iTrader: (1)

has anyone read that sticky on the paint and detailing section about the paint roof bubbling?? if so has anyone gone to a dealership to see if they will do it for you? from what i got from it, it just depends on the dealership whether they will do it for free or not

zeus201

~ 485 / 525.

I'd love to have more and hopefully can next spring / summer!

Was he younger guy...if so it was Jordan. Works over at Earl Tires and hangs out with the ICE guys. Ported / pullied Eaton and bolt - on's, probably similar or higher #'s than mine.

BTW, if you ever see a 03/04 Redfire Vert with CCW wheels, it would get ugly real fast if he does race. Dudes car is putting down 650 plus a little giggle juice just in case.

Mightymike2000ss

iTrader: (4)

yes it jordan he was messin with he would run up on me then back off then he would do it again

Unstang

iTrader: (26)

Your not going to get that done under warranty around here.. Checked into it for a car I had.

01FbTaWs6

iTrader: (12)

Well guys, i dont want to do this but im going to put the car up for sale. Money is just way tight right now after buying the house and whatnot. Here are the details:
Its a 2001 Trams-Am WS6. 6 Speed. 106k miles on it. Car is Pewter with blackbird stripes, tinted tails and side markers, tan leather interior in excellent shape. Car has a few scrathes here and there and the normal rock chips but its a very very clean car. The car was tuned by me with HPT and put down 425/395 throught the full exhaust. Its also got a LC-1 wideband hardwired in the car and it sets in the glove box. Car is tuned in SD but still has the maf inline. Asking 13,500.00 for the car. Located in Cedar Rapids, Iowa.
Below are the following mods:

Interior:
Tan leather in excellent shape
Dash pad in great shape. No cracks, etc.
The door panels have the normal cracks in them.
WS6store short stick.
LED shift light/tach in the center gauge vent.
Pioneer head unit with JBL GTO series 6.5 speakers, MB Qaurt 10 in a stealth box, all powered by an MB Qaurt 5 channel amp.

Exterior:
Tinted tails, side markers and third brakelight.
black CETA mod
Blackbird stripes
Black emblems and rear inlays
The front bumper has small stress cracks on it, but you have to be looking for them, it is also cracked underneath about 2 inchs. You also have to get down and look under the bumper to see this.

Mods:
226/230 .609/.588 111+1 Patrick G cam
LS7 lifters
GM MLS head gaskets
CNC ported LS6 heads milled to 58cc
Patriot Dual gold valve springs w/ titanium retainers.
Lingenfelter High volume oil pump
LS2 timing chain
Flowtech headers with XS stainless catless Y pipe and magnaflow catback exhaust.
SVO Blue top injectors. I think they flow like 42 lb's on our fuel pressure.
Richmond 4.10 gears (make quite abit of noise)
Midwest Chassis and Performance Chassis mounted adjustable tq arm.
Competition engineering rear drag shocks.
Double Adjustable lower control arms
LCA relocation brackets.
BFG DR's

the bad:
The car does need a new valve seal because I had to reuse one of the old ones when I did the heads/cam. It is on the front passenger side of the head, so its an easy install. And the rear end whines pretty good. But other then that the car is solid.

Here are a few pictures of the car:

Unstang

iTrader: (26)

Too bad your listing it Rodney, but you've gotta do what you've gotta do. Nice car!!

01FbTaWs6

iTrader: (12)

if it doesnt sell, ill keep it. Im not going to go down much on price, i owe more then im asking to the bank still. Either way, we will see.

benji's_z28

iTrader: (1)

so pretty much im SOL?? and have to bite the bullet and get it fixed out of pocket??

joshp14

iTrader: (5)

Good luck...I work at a dealership and they wont fix mine thats doing it. The price of the panel has doubled in price over the last year...they used to be less than $300...now they are over $600.

Screamer27

iTrader: (2)

Rodney, I hate to see you get rid of it, but I understand how tight money gets- GF and I are moving to ames, and yeah, Money only gets tighter it seems. I hope you have good luck in selling it though.

1320 HUSTLER

iTrader: (3)

Just thought i would repost. last month went 9.91 @ 138 with a 1.39 60ft..

Unstang

iTrader: (26)

Nice run! Did you run that at Tristate?

I updated the list on page 81 of this thread. How deep in the 10s are you on the motor?

daves94formula

iTrader: (3)

hey whats everyone doing this weekend? because im sitting here on my 2 weeks of leave and im bored out of my mind lol

RedRocketZ28

iTrader: (19)

Hit me up this weekend sometime Dave. I'm usually fairly bored.

355z28

iTrader: (8)

Saturday is the girls Bday, but I think sunday im not doing anything. Probably dropping the tranny in my car to see what happened last month.

Screamer27

iTrader: (2)

355Z, trans work brings back bad memories... I just spent the last week rebuilding the 4l60 in the old plow truck. ick.