Another Hall's deal!!!
08-09-2008, 12:50 PM
#2202
TECH Apprentice
iTrader: (16)
Join Date: Feb 2008
Location: Fort Wayne, IN
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Nick,
I know a local with a C4, that they keep trying to sell. Not sure if it runs (not particularly important for you anyway I guess) but they've been trying to get rid of it for a while now, I'm sure it'd go cheap. From the look it's 85-89ish, and the body looked to be in good shape, although it BADLY needs a buff to bring the shine out.
Next time I go by I'll see if they're still selling it. It's buried in their garage right now.
I know a local with a C4, that they keep trying to sell. Not sure if it runs (not particularly important for you anyway I guess) but they've been trying to get rid of it for a while now, I'm sure it'd go cheap. From the look it's 85-89ish, and the body looked to be in good shape, although it BADLY needs a buff to bring the shine out.
Next time I go by I'll see if they're still selling it. It's buried in their garage right now.
08-09-2008, 04:55 PM
#2208
11 Second Club
iTrader: (34)
Join Date: Feb 2005
Location: Ft. Wayne, Indiana
Posts: 3,158
Likes: 0
Received 0 Likes
on
0 Posts
Boost A Pump is officially installed....Thanks to Shawn for getting me the wire. It wasn't as bad as I thought it would be....other than my back is screaming at me.
08-09-2008, 05:22 PM
#2210
11 Second Club
iTrader: (34)
Join Date: Feb 2005
Location: Ft. Wayne, Indiana
Posts: 3,158
Likes: 0
Received 0 Likes
on
0 Posts
#1 Rearend, TA/PHB/LCA/ QA1 rear shocks
#2 Brakelines to the Proportioning Valve and Roll Control, bleed the brakes
#3 Textralia Clutch along with the Tranny and Driveshaft, bleed the clutch
#4 Exhaust
#5 Wiring of the Nitrous System
#6 Put in all the fluids
#7 Start it up
#8 Tuning with and without nitrous
#9 Alignment and adjustment of ride height.
#10 Roll Cage....probably next year or over the winter for that.
I'm sure I'm forgetting something but for now this is where it's at.
#2 Brakelines to the Proportioning Valve and Roll Control, bleed the brakes
#3 Textralia Clutch along with the Tranny and Driveshaft, bleed the clutch
#4 Exhaust
#5 Wiring of the Nitrous System
#6 Put in all the fluids
#7 Start it up
#8 Tuning with and without nitrous
#9 Alignment and adjustment of ride height.
#10 Roll Cage....probably next year or over the winter for that.
I'm sure I'm forgetting something but for now this is where it's at.
08-09-2008, 05:24 PM
#2211
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
#1 Rearend, TA/PHB/LCA/ QA1 rear shocks
#2 Brakelines to the Proportioning Valve and Roll Control, bleed the brakes
#3 Textralia Clutch along with the Tranny and Driveshaft, bleed the clutch
#4 Exhaust
#5 Wiring of the Nitrous System
#6 Put in all the fluids
#7 Start it up
#8 Tuning with and without nitrous
#9 Alignment and adjustment of ride height.
#10 Roll Cage....probably next year or over the winter for that.
I'm sure I'm forgetting something but for now this is where it's at.
#2 Brakelines to the Proportioning Valve and Roll Control, bleed the brakes
#3 Textralia Clutch along with the Tranny and Driveshaft, bleed the clutch
#4 Exhaust
#5 Wiring of the Nitrous System
#6 Put in all the fluids
#7 Start it up
#8 Tuning with and without nitrous
#9 Alignment and adjustment of ride height.
#10 Roll Cage....probably next year or over the winter for that.
I'm sure I'm forgetting something but for now this is where it's at.
08-10-2008, 07:56 AM
#2216
10 Second Club
iTrader: (4)
Join Date: Mar 2006
Location: Fort Wayne, IN
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
I was @ Hall's for a while. Left around 10:30. I thought they'd be packed with Muddy River cars, but there were only a few cars there. Glad I didn't miss anything.
