Another Hall's deal!!!
I thought it was more like 3years
02-12-2009, 07:23 PM
#8723
Teching In
Join Date: Nov 2008
Location: indiana
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
hey beast......this is the nest song from that group....
http://www.youtube.com/watch?v=4pXfHLUlZf4
this is phucken da best
plus robbie i told you i was just playing when i txt ya....i was on JPH 's side just to keep the **** rolling back and forth...
http://www.youtube.com/watch?v=4pXfHLUlZf4
this is phucken da best
plus robbie i told you i was just playing when i txt ya....i was on JPH 's side just to keep the **** rolling back and forth...
02-12-2009, 07:49 PM
#8724
Teching In
iTrader: (1)
Join Date: Apr 2008
Location: Manureville
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
nah boys, i am looking at getting more than 650 out of the stock block, crank and heads. No other work will be done. Your little lsx motors just wont cut it, nor will they last with that abuse.
02-12-2009, 08:42 PM
#8728
TECH Apprentice
iTrader: (16)
Join Date: Feb 2008
Location: Fort Wayne, IN
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
hey beast......this is the nest song from that group....
http://www.youtube.com/watch?v=4pXfHLUlZf4
this is phucken da best
plus robbie i told you i was just playing when i txt ya....i was on JPH 's side just to keep the **** rolling back and forth...
http://www.youtube.com/watch?v=4pXfHLUlZf4
this is phucken da best
plus robbie i told you i was just playing when i txt ya....i was on JPH 's side just to keep the **** rolling back and forth...
02-12-2009, 10:02 PM
#8729
Staging Lane
Join Date: Apr 2006
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
02-12-2009, 11:59 PM
#8732
Not enough injector for e85. Hell, with the gas milage you get with that + the cost you're halfway to klotz anyway. 
I'm not running Klotz full time (I don't have Gerber level bankroll) but I will have a Klotz boost level and tune available. That **** just smells good...
On an unrelated topic... I hate stupid people.
My BMW has, since I bought it, had a slight shudder in the front suspension, and been a little unstable at high speed. I finally got around to buying all new front suspension (control arms, ball joints, tie rods, bushings, etc.) One of the bits I purchased was a set of "offset" bushings that increase the caster. Since I put them in (a few weeks ago) I've had a slight rub at full lock and even more awkward handling...
So tonight, I swap in the rest of the suspension, put the car down and the damned wheels are hitting the fenders. WTF.
Turns out the guy who I bought the offset bushings from installed them BACKWARDS. Nice. The old suspension was so trashed that it had enough compliance to let the wheels (mostly) center anyway. The new, proper parts were being pulled back by the misinstalled bushings.
Pressed them out and put them in the right way and voila, suspension feels great, and the rubbing is GONE.
I'm going to take my broken jack and smack this tool in the face with it...
I'm not running Klotz full time (I don't have Gerber level bankroll) but I will have a Klotz boost level and tune available. That **** just smells good...On an unrelated topic... I hate stupid people.
My BMW has, since I bought it, had a slight shudder in the front suspension, and been a little unstable at high speed. I finally got around to buying all new front suspension (control arms, ball joints, tie rods, bushings, etc.) One of the bits I purchased was a set of "offset" bushings that increase the caster. Since I put them in (a few weeks ago) I've had a slight rub at full lock and even more awkward handling...
So tonight, I swap in the rest of the suspension, put the car down and the damned wheels are hitting the fenders. WTF.
Turns out the guy who I bought the offset bushings from installed them BACKWARDS. Nice. The old suspension was so trashed that it had enough compliance to let the wheels (mostly) center anyway. The new, proper parts were being pulled back by the misinstalled bushings.
Pressed them out and put them in the right way and voila, suspension feels great, and the rubbing is GONE.
I'm going to take my broken jack and smack this tool in the face with it...
02-13-2009, 07:10 AM
#8733
Staging Lane
Join Date: Apr 2006
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
02-13-2009, 08:56 AM
#8735
Teching In
Join Date: Apr 2007
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Mine has all stock internals from the factory... does that mean I can get in on some of these matches?? I cant wait for spring
02-13-2009, 09:50 AM
#8736
And in the "Blake can't win for losing" news...
Press fit ball joint in one of the new control arms I put in last night just failed. 11 miles of use. Either the ball joint was too small or the control arm was too big. Either way, it failed. Of note, I didn't assemble the arms, they came assembled from the manufacturer. New in box.
I'm getting sick of this ****. I'm taking up knitting or something.
