WhO WiN** Mach 1 vs Camaro SS**
Trending Topics
#13
I have only seen 1 run at the track, a 5speed with exhaust and he was running 9.20-9.10's. The Mach's are cool cars, and I agree with UNIT213 if its stock for stock it would be a drivers race with our cars holding an ever so slight advantage it driven properly. However, Mod for Mod our cars should hold a pretty good edge. I've seen N/A Mach's with all the Major bolt-ons put down anywhere from 310 up to 333. We all know what we can get out of our cars in N/A form of course. But again the Mach is still a pretty cool ride. Just my worthless .02
#14
RIP April 14, 2008
Joined: Aug 2004
Posts: 1,603
Likes: 0
From: the land where cars repeatedly hit my bumper when I'm in the store...
stock mach 1 = heavier
stock mach 1 = -20hp
stock mach 1 = less aerodynamic
stock mach 1 = -15 lb/ft torque
stock mach 1 = will lose
I can beat them in my stock Z though not by much.
stock mach 1 = -20hp
stock mach 1 = less aerodynamic
stock mach 1 = -15 lb/ft torque
stock mach 1 = will lose
I can beat them in my stock Z though not by much.
#15
i raced one a couple of months back. mostly did it cause she looked good. wasn't much of a race, but she was stock except for a flowbastard cat back. cars aren't slouches. stock ls1's need to get their wheaties before they pick a race with one
#16
Originally Posted by 1998camaroz28
stock mach 1 = heavier
stock mach 1 = -20hp
stock mach 1 = less aerodynamic
stock mach 1 = -15 lb/ft torque
stock mach 1 = will lose
I can beat them in my stock Z though not by much.
stock mach 1 = -20hp
stock mach 1 = less aerodynamic
stock mach 1 = -15 lb/ft torque
stock mach 1 = will lose
I can beat them in my stock Z though not by much.
#17
Mach 1 has a better 1st & 2nd tranny gear with the slightly better 3.55s out back. The fact that Machs make less torque actually helps them get outta the hole easier. I'd say 1/8 is all Mach 1, 1/4 is gonna be close with a slight edge for the SS, and anything after the 1/4 is all Chevy. This is assuming both cars are manual tranny... Auto tranny vs. auto tranny, I give the Mach 1 no chance...