Looking to play with some spray
06-11-2009, 09:53 PM
#1
11 Second Club
Thread Starter
iTrader: (14)
Join Date: May 2007
Location: Aurora IL
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
Looking to play with some spray I am looking at putting a kit on my car the end of the year to see what i can get the car to do. But i want a good kit for the mods but dont want to go crazy. what upgrading will i need to do to my fuel system??
engine
Ls6 long block stock
vindicator cam 240 244 608 596 on a 112LSA
kooks 1 7/8 header's kooks 4in y and mufflex 4in spintech
fast90/90 ported with 42pd injectors
tick shift stage 2 m6 tex oz700 clutch
moser nine with a going to be 4.56 gear and 28 tire D/R on the street and slick for the track
and right know the car makes 436RWHP & 388RWTQ and its best was a 11.45 with a **** poor 1.65 60 so i am tying to get 10.s cam only right know hens the 4.56 gears and 28 tire is going in. and my best mph is 124mph and the car weight is 3456lbs with me in it.
So help me make my mind
engine
Ls6 long block stock
vindicator cam 240 244 608 596 on a 112LSA
kooks 1 7/8 header's kooks 4in y and mufflex 4in spintech
fast90/90 ported with 42pd injectors
tick shift stage 2 m6 tex oz700 clutch
moser nine with a going to be 4.56 gear and 28 tire D/R on the street and slick for the track
and right know the car makes 436RWHP & 388RWTQ and its best was a 11.45 with a **** poor 1.65 60 so i am tying to get 10.s cam only right know hens the 4.56 gears and 28 tire is going in. and my best mph is 124mph and the car weight is 3456lbs with me in it.
So help me make my mind
06-12-2009, 12:36 PM
#4
10 Second Club
iTrader: (11)
Join Date: Apr 2006
Location: Indy, IN
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
I would be worried about hitting the rev limiter in 4th gear with the 4.56s. I would be more inclined to recommend 4.30 gears.
I would put a 255 pump in the tank. The 42# injectors if they are green tops should be fine. I would do a simple plate kit and your car should fly.
I would put a 255 pump in the tank. The 42# injectors if they are green tops should be fine. I would do a simple plate kit and your car should fly.
06-12-2009, 01:20 PM
#6
11 Second Club
Thread Starter
iTrader: (14)
Join Date: May 2007
Location: Aurora IL
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
I would be worried about hitting the rev limiter in 4th gear with the 4.56s. I would be more inclined to recommend 4.30 gears.
I would put a 255 pump in the tank. The 42# injectors if they are green tops should be fine. I would do a simple plate kit and your car should fly.
I would put a 255 pump in the tank. The 42# injectors if they are green tops should be fine. I would do a simple plate kit and your car should fly.
they are green top's and yeah the car moves good know just want more
looking for low 10.s and high 9.s with my heads i have waiting to go on TEA stage 2.5 ls6 heads milled to 59cc Last edited by 98blueSScamaro; 06-12-2009 at 01:28 PM.
Trending Topics
06-12-2009, 01:35 PM
#8
11 Second Club
iTrader: (3)
Join Date: Dec 2006
Location: Alabama
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
Oh yes..... the Vindicator LOVES the spray especially with a bump in compression
. I would recommend a stronger pump ( I like the walbro or racetronix) for that big of a shot I like to use the higher pressure pumps instead of the low pressure ones when using a stock in tank regulator. That a nice plate kit (I like the Daves nitrous outlet kit, what I have). Also just some food for though I have a timing twister on my car so she runs strong on the motor but can pull timing at the flip of my arming switch since the higher compression. Just remember to gap your plugs as well as adjust your heat range and fuel mixture.
. I would recommend a stronger pump ( I like the walbro or racetronix) for that big of a shot I like to use the higher pressure pumps instead of the low pressure ones when using a stock in tank regulator. That a nice plate kit (I like the Daves nitrous outlet kit, what I have). Also just some food for though I have a timing twister on my car so she runs strong on the motor but can pull timing at the flip of my arming switch since the higher compression. Just remember to gap your plugs as well as adjust your heat range and fuel mixture. 
06-12-2009, 01:49 PM
#10
11 Second Club
Thread Starter
iTrader: (14)
Join Date: May 2007
Location: Aurora IL
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
Oh yes..... the Vindicator LOVES the spray especially with a bump in compression. I would recommend a stronger pump ( I like the walbro or racetronix) for that big of a shot I like to use the higher pressure pumps instead of the low pressure ones when using a stock in tank regulator. That a nice plate kit (I like the Daves nitrous outlet kit, what I have). Also just some food for though I have a timing twister on my car so she runs strong on the motor but can pull timing at the flip of my arming switch since the higher compression. Just remember to gap your plugs as well as adjust your heat range and fuel mixture.
. I would recommend a stronger pump ( I like the walbro or racetronix) for that big of a shot I like to use the higher pressure pumps instead of the low pressure ones when using a stock in tank regulator. That a nice plate kit (I like the Daves nitrous outlet kit, what I have). Also just some food for though I have a timing twister on my car so she runs strong on the motor but can pull timing at the flip of my arming switch since the higher compression. Just remember to gap your plugs as well as adjust your heat range and fuel mixture. and this cam is something else it pulls in my m6 so hard. i mph 124 with a 3.89gear and a crapy 1.72 60 
06-12-2009, 01:56 PM
#11
11 Second Club
iTrader: (3)
Join Date: Dec 2006
Location: Alabama
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
I haven't been to the track since I put my car back to together but on the motor she pulls like a beast (I'm M6 with 4.10s and 59cc chambers) and the spray (for me is usually 125 or 150) makes it OH SOOOO much better. LOL
06-12-2009, 10:15 PM
#13
to be honest, I'd consider a twin intank if you're making 440 on motor and are gonna hit it with a 150-200 hit, a fuel pump is like 150 bones vs toasting a 7k engine, at least thats how I look at it. Short story, you're car should fly.
Ps, i'm in st. charles so if it comes to tossing a dual pump in, i've done it, twice piece of cake, if you go that route let me know if you need a hand.
Ps, i'm in st. charles so if it comes to tossing a dual pump in, i've done it, twice piece of cake, if you go that route let me know if you need a hand.
06-12-2009, 11:10 PM
#14
TECH Fanatic
iTrader: (6)
Join Date: Nov 2007
Location: Carol Stream Il.
Posts: 1,524
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys, looks like your pretty local to me too. I probably shouldn't say though as I drive a lowly LT1. 
You locals ever hit up GLD or Byron?
By the way, I run a Nitro Daves plate also and am now addicted to nitrous.
You locals ever hit up GLD or Byron?By the way, I run a Nitro Daves plate also and am now addicted to nitrous.
06-12-2009, 11:16 PM
#15
On The Tree
Join Date: Mar 2009
Location: Catoosa Ok
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
i have a lt1 with stock fuel pump and shooting a 200 shot wet the only upgrade i have for the nitious is a msd retard box and a boost pump i would recomend a window switch i have my nitrious on a full throttle switch and my buddy has a window switch so when he gives it full throttle the nitrious cmes on at 3,000 rpms and shuts off at 6,500 so he doesn't spray it to low and doesn't bounce off the rev limiter just my .02
06-13-2009, 02:27 PM
#16
11 Second Club
Thread Starter
iTrader: (14)
Join Date: May 2007
Location: Aurora IL
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
to be honest, I'd consider a twin intank if you're making 440 on motor and are gonna hit it with a 150-200 hit, a fuel pump is like 150 bones vs toasting a 7k engine, at least thats how I look at it. Short story, you're car should fly.
Ps, i'm in st. charles so if it comes to tossing a dual pump in, i've done it, twice piece of cake, if you go that route let me know if you need a hand.
Ps, i'm in st. charles so if it comes to tossing a dual pump in, i've done it, twice piece of cake, if you go that route let me know if you need a hand.
Rob
06-15-2009, 09:49 AM
#18
FormerVendor
iTrader: (4)
Join Date: Jul 2005
Location: Glenolden, PA
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
I am looking at putting a kit on my car the end of the year to see what i can get the car to do. But i want a good kit for the mods but dont want to go crazy. what upgrading will i need to do to my fuel system??
engine
Ls6 long block stock
vindicator cam 240 244 608 596 on a 112LSA
kooks 1 7/8 header's kooks 4in y and mufflex 4in spintech
fast90/90 ported with 42pd injectors
tick shift stage 2 m6 tex oz700 clutch
moser nine with a going to be 4.56 gear and 28 tire D/R on the street and slick for the track
and right know the car makes 436RWHP & 388RWTQ and its best was a 11.45 with a **** poor 1.65 60 so i am tying to get 10.s cam only right know hens the 4.56 gears and 28 tire is going in. and my best mph is 124mph and the car weight is 3456lbs with me in it.
So help me make my mind
engine
Ls6 long block stock
vindicator cam 240 244 608 596 on a 112LSA
kooks 1 7/8 header's kooks 4in y and mufflex 4in spintech
fast90/90 ported with 42pd injectors
tick shift stage 2 m6 tex oz700 clutch
moser nine with a going to be 4.56 gear and 28 tire D/R on the street and slick for the track
and right know the car makes 436RWHP & 388RWTQ and its best was a 11.45 with a **** poor 1.65 60 so i am tying to get 10.s cam only right know hens the 4.56 gears and 28 tire is going in. and my best mph is 124mph and the car weight is 3456lbs with me in it.
So help me make my mind
Nick
06-15-2009, 10:32 AM
#19
11 Second Club
Thread Starter
iTrader: (14)
Join Date: May 2007
Location: Aurora IL
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
Thanx for the input guys i am really looking to go with a 90mm plate kit. who makes a nice clean 90mm plate kit and what is the pump of choice. i have the hot wire kit in the car right know
