redriver racing

Wanna see if anybody else has had this problem. When the controller is hooked up and u depress the wot switch something in the dash is clicking. It does not do this without the controller hooked up. What is causing this? We can not figure this out.

Fbodyjunkie06

iTrader: (10)

Sounds like the solenoids are clicking?

krissoto

iTrader: (3)

Well there are relays built in the setup, they wld be switching back after u depress it. If the set up is on a ls1 u don't need the wot switch bc u can hook it up to the tps.

redriver racing

Its not the solenoids clicking its back feeding or something. Just dont know where its at but its in the dash. What wire/color on the tps do i use. Will try that and see if that works.

meatheadgn

iTrader: (1)

It may the actual NOS box clicking when it gets the proper signal. Put your ear or a stethoscope up to it and see if that is where it is coming from.

Neal@NitrousOutlet

Hope we can get you taken care of, You called as i was reading your thread.

redriver racing

Will try it later tonight and will let u know. Thank's

redriver racing

Figured out where the noise was coming from, its back feeding through the widshield wiper motor. Not sure how but it is. U can take the wiper fuse out & it quits. But here is the deal u can move the white/hot wire to a different post & it still does it when the wiper fuse is back in. I run the white wire from the progressive to the battery & same thing. So know matter where u put the white wire on the progressive it makes the chatter noise through wiper motor unless u take the fuse out. I also moved grounds to a different location it still does this. The only thing i have done is add the progressive & thats it. Open to any opinions.

redriver racing

I would like to give chris @ nitrous outlet a big thank's for taking the time to talk to me on the phone. Hopefully we can get this figured out.