Docrocket1967

iTrader: (1)

I purchased a 2000 WS6 that had this on it. Don't know much about it other than it's an eye sore. I would imagine it's nitrous related and if i remove it can i just put a normal schrader valve cap back on like oem? Thanks for your help

Bowtiedford

iTrader: (9)

yep just cap it off, looks like some type of Hobbs switch that is pressure related to turn something off or on

Docrocket1967

iTrader: (1)

Awesome thank you for your help

tug686spd

iTrader: (11)

Fuel pressure safety switch. The schrader guts were probly removed so you'll have to replace them when capping it.

Docrocket1967

iTrader: (1)

That being the case I will probably wait and just replace and upgrade to nicer fuel rails but I am glad you told me this.


What is the purpose of this? Is it actually for nitrous because I was just taking a guess in the dark. Thank you for your help

RobsZ28

iTrader: (3)

That is a great looking car in your profile picture.

baronsmith98

iTrader: (2)

That switch is often used with nitrous kits so in case you lose fuel pressure it will cut power to the nitrous kit so you will not run lean

tug686spd

iTrader: (11)

It actually looks like your adapter is leaking/seeping a little on the switch side of the adapter fitting. I believe the schrader stem is the same size as tire/tube so you should be able to fing and get one really cheap then cap it.

Docrocket1967

iTrader: (1)

It's not mine I just liked the color and was saved on the computer so i used it

Docrocket1967

iTrader: (1)

Thank you for your help

Docrocket1967

iTrader: (1)

It's possible. Ive kept my eye on it since i got the car but hasn't seemed to get worse but i def appreciate your help and will be replacing

RobsZ28

iTrader: (3)

It was mine, my favorite picture of the car. Cool to see someone else likes it too, and uses the picture.

Docrocket1967

iTrader: (1)

That's awesome. Got a thread on here where I could see more pictures of it?

RobsZ28

iTrader: (3)

I did a build post for it.
https://ls1tech.com/forums/drag-raci...aro-build.html

Docrocket1967

iTrader: (1)

I will definitely check this out. Thank you.