Got a full bottle but all that comes out is air? WTF? This is wierd, I even removed the jet and nothing. Help

 

Is you bottle laying slightly upward with the top a little up?? and is your nozzle from your bottle at a 45 degree angle?

 

It is angled up.

 

crack the bottle (barely open), turn the system on and hold the purge or tape it down like I did and loosen the fittings starting just b4 the purge solenoid, I did it and found a loose screw on my bottle opener, be careful and watch closely, it's tricky but it works.

 

crack the bottle (barely open), turn the system on and hold the purge or tape it down like I did and loosen the fittings starting just b4 the purge solenoid, I did it and found a loose fitting on my bottle opener, be careful and watch closely, it's tricky but it works.

 

siphon tube come off the valve? do you hear any rattling of the bottle?

 

No rattling in or on the bottle, this upsets me. My bottle may not be angled up enough. I will try and fix that today and see what happens.

 

for kicks, just stand it straight up and crack take the line off the bottle and open the valve. if it somes out white, then you're fine there. reattach the line. go to the solenoid and disconnect the line. leave the bottle standing up. open the bottle and crack the line at the solenoid. if you have white come out, then it's a bottle angle problem. it'll take a few seconds for it to come out white as you have to clear the line out and wait for the nitrous to get to the solenoid.