camar0corey

iTrader: (22)

I don't know much about LS1 cars, but I think on my LT1 car I have the factory Bose amp on that side?? Don't know if LS1 cars have anything over there??

Fbody98

iTrader: (2)

I want it on the hump so i dont need the opener its easy access!

Greek02SS

if you have a 12 disc changer the panel is open on that side...so 'hiding' the bottle would be out of the question...

nick_4.8sierra

iTrader: (2)

I don't have factory amp or 12 disc. Will the bottle fit on that side in my car?

JRM96TA

iTrader: (1)

Does anyone have pictures of the 860 spare tire mount in a Firebird? I tryed intsalling mine and none of the holes seam to line up with any thing but it fits my buddys Camaro perfectly.

camar0corey

iTrader: (22)

Did it come with instructions? Your only supposed to use the center hole or something, and not use the spacer? Maybe someone with a scanner could send you the directions, I don't have a scanner. Not even sure I can find my instructions in the mess I have going on.

Greek02SS

I'm sure it probably will fit. i haven't looked at the space in comparisson to the bottle. i'll check it out tomorrow for you if you'd like. i have a 10# bottle btw

Greek02SS

theres pics a page or 2 back i thought?

NHRATA01

iTrader: (10)

Yeah I just installed one last week. You only use one of the holes on a Firebird, near where the piece that holds the spare tire attaches. Then you have to drill two holes on the other side that match the holes in the plate.

860 Performance

iTrader: (1)

Here is a link to the instructions

http://www.860performance.com/files/...structions.pdf

Like NHRATA01 said, Firebirds use different holes than a Camaro uses.
Hope that helps.
Vinny

67GoatPimp

I used a nitro dave's mounting bracket that I had powder coated in wrinkle black. I think it looks much better this way, it almost perectly matches the center console. I have yet to install the blow down tube, It will be flexible and out under the rear passenger seat, and when my heater and remote gauge get here, I'll use a small length of hose to hide the sensors under the seat or bracket to keep it from looking cluttered. I also have a set of NOS quick release brackets on the way now. Too bad this thing isn't drilled for them.

JRM96TA

iTrader: (1)

Thank You, all this helps it appears that my spare tire/power antenna bracket sticks out to far(or the bracket has extra metal). It looks like I can make it work by cuting about 1 1/2" off the area where the 860 mount is bent down.

NHRATA01

iTrader: (10)

Here's a pic of the 860 mount plate in my car, if it helps:

nick_4.8sierra

iTrader: (2)

That would be great. Let me know when you do. I would be it's FREEZING down here in Texas. lol

Thanks!!

HeavyWeight

Anyone have 2 bottles mounted

Greek02SS

there's something else on that side, an extra hump....for me at least, i wouldn't be able to fit it there. but you'rs might be different, just pull the panel and check it i guess, sorry!

Sprayed1998

iTrader: (10)

I just got this ND mounting plate and In have the NOS brackets on them, the 7" Dia. ones but no quick release, the fronts line up perfect but i had to drill new holes in the rear bracket to make it fit on the mounting plate, it was about 1" too thin.

2000Hawk

iTrader: (5)

Heres a few photos of the bottle mounted in my car. Through the windshield its hard to see because of the tinted windows. I love how it looks, it belongs on the tunnel.



And here is a photo of my nitrous pressure gauge:

-Joel

camar0corey

iTrader: (22)

So would a 15 lb. bottle with a remote opener fit in the spare tire spot with the 860 mount? Thinking if I sell the zex kit and get the NOS one I might bump up the bottle size to 15 so I wouldn't have to go get refills as much.

02NHRAtransAm

iTrader: (17)

Nothing fancy here... just a bottle, opener, warmer , and a blanket