ls1curt

iTrader: (31)

i was wondering if someone could draw me up a wiring diagram for this:
HSW microedge
nitrous outlet plate kit w/ purge
n.o. standalone
thanks

The highlander

Is a relay that necessary? Aren't the controllers a digital relay perse?

Thanks

87Pomona

I need a wiring diagram for the following:

Dynotune single nozzle wet kit
FPSS
MSD #8969 Window switch
WOT Switch
HSW Purge system
NOS orange bottle heater
Nitrous Outlet Center console switch panel with pressure gauge


thanks in advance

87Pomona

^^^^^ Anyone? This is my first Nitrous kit and would like to wire it the right way.

StreetSilverado

iTrader: (17)

Found this diagram to use. Can anyone add a dedicated fuel, purge, and bottle heater or at least lead me in the right direction with it? Using the nitrous outlet ashtray panel.

Thanks.

1sicklsx

iTrader: (1)

I have a nitrous outlet wet plate kit I need a diagram for
Also need diagrams for automatic bottle heater and how to do the relay and wiring for tricking the iat

98sscammed

I have a nitrous outlet wet plate kit with their progressive nitrous controller and a lingenfelter LNC-002 activated by an WOT switch. I was wonder if the LNC needs to be activated before the nitrous or at the same time?

tigertales

^ Same question. Wire to the noid, switch, or controller?

camarorat

iTrader: (8)

I need diagram for Nitrous outlet window switch,LINGENFELTER LNC-002, FPSS, linelock, auto, ashtray 4 button switch, bottle heater.

Wicked 94TA

iTrader: (5)

I'm going to put together a switch panel for my nitrous setup. What kind of switch will I need to arm it and what will I need to activate the bottle heater?

Sof_Top

Is there a wiring diagram for a Zex wet kit with window switch and the resistor timing pull trick?

Sof_Top

...ttt

KING Z28 HAWK

iTrader: (11)

I have a second hand wet kit with no instructions and I'm lost. Can somebody help me with a wiring diagram for a single stage wet kit. I have a dynotune window switch, heater, purge, FPSS and a ashtray switch plate.

Thank you.

KING Z28 HAWK

iTrader: (11)

Bump! Come guys somebody help me out please.

Clint Hester

Guys i have a question about this diagram and the nos mini controller? Doesnt the WOT microswitch have to have a 12v switched power source? Also the green wire for the mini doesnt it go to the MSD tach input source and the yellow CH1 would go to a retard box? Thanks

Clint Hester

GOT IT!!!

NW05gtoWA

Im looking for some help on wiring up a kit in my gto, This is what im looking at if any body can help.

zex wet kit
zex window switch
Lingenfelter LNC-2000
Nitrous outlet GTO switch pannel
purge and bottle warmer

If its in this thread I must of missed it. thanks

98chevyz71

iTrader: (2)

Looks like not much help in this thread anymore.... ??? but might get someone to help.... needa hook up my msd window switch.... im running a full throttle switch and not sure where the yellow(normally opened) and grey (normally closed) go? could someone help me out?

coolmanvette75

iTrader: (2)

Anyone still doing these diagrams?!? I need one for the following. NO LT1 plate kit with purge, NO Window switch (using tps instead of a wot switch), NO ashtray switch panel, Pressure regulated bottle heater, Mallory 685 to pull timing. All going on a 94 Z28...

Burrhos

iTrader: (3)

Need diagram for

NO Plate kit, switch panel, fpss, purge, msd digital window switch, wot switch

Thanks in advance