help with installation

Reply Subscribe

Thread Tools

Search this Thread

Nov 13, 2007 | 06:03 PM

Jaime SS

Thread Starter

On The Tree

Joined: Oct 2007

Posts: 127

Likes: 0

From: Houston,TX (clear lake)

help with installation

hey guys i just received my zex wet nitrous kit and i'm thinking of installing it myself

what do you guys think, do it myself or pay someone?

does anybody have the same set up on their car that can send me some pics.

thanks

Nov 13, 2007 | 08:23 PM

Jaime SS

Thread Starter

On The Tree

Joined: Oct 2007

Posts: 127

Likes: 0

From: Houston,TX (clear lake)

well i tought about it and decided to do the installation myself

just one question

i have a throttle body spacer and the plastic thing in between the throttle body and maf sensor is kind of crunched up

i read the manual and it said that it should be put before the TB and after the MAF sensor

in my case would you recommend me to take off the spacer and run the nozzle on the plastic thing, or what would happen if i were to put the nozzle on the lid before the maf sensor

thanks for the help

if anybody has pics of their set up i'd really appreciate it

Nov 13, 2007 | 08:29 PM

volcanic2345

12 Second Club

iTrader: (9)

Joined: Mar 2005

Posts: 938

Likes: 0

From: arlington tx

if you have a dry put it in the lid if you got a wet put the nozzle in the bellow after the maf! facing the intake so it can shoot in the intake!

Nov 13, 2007 | 08:31 PM

Jaime SS

Thread Starter

On The Tree

Joined: Oct 2007

Posts: 127

Likes: 0

From: Houston,TX (clear lake)

well i have a wet kit

i guess im going to have to take off my Throttle Body spacer

Nov 14, 2007 | 03:46 PM

Jaime SS

Thread Starter

On The Tree

Joined: Oct 2007

Posts: 127

Likes: 0

From: Houston,TX (clear lake)

hey guys im almost dome installing my wet nitrous kit

just had a quick question

it says to run one of the wires from the management unit to the output voltage lead from the throttle position sensor?

i located the throtltle position srnsor but their is 3 wires a black one, grey, and blue

to which one does it go to?

Nov 14, 2007 | 09:44 PM

Jaime SS

Thread Starter

On The Tree

Joined: Oct 2007

Posts: 127

Likes: 0

From: Houston,TX (clear lake)

i got everything installed but the fuel line

im having trouble finding a way to put it on

i've tried looking online for pics of the setup byt cant seem to fnd anything

does anybody have a pic of how they ran the fuel to the unit

i noticed that their is like 2 fuel lines next to each other wich one is the correct one, what other set ups is their to run the fuel.

i looked at some threads and noticed the shrader valve was one way, would that be the best way, if so how is it done

thanks for all the help

Last edited by Jaime SS; Nov 14, 2007 at 10:30 PM.

Nov 15, 2007 | 05:43 PM

grn95t/a

11 Second Club

iTrader: (10)

Joined: Nov 2006

Posts: 802

Likes: 0

From: york county, va.

on my zex kit it came with a 90 degree 4an female/male fitting that screwed onto the scharder valve.but u must remove the valve core first. if your kit didn't come with the fitting just find a shop that makes hydraulic hoses and they will have it.