Help Critique my New DRY Timing Pull Write-Up
#1
Thread Starter
TECH Senior Member
iTrader: (2)
Help Critique my New DRY Timing Pull Write-Up
Here it is for all to use. We have some savoy tech guys here; Please see if it makes sense through out, and if any corrections need to be made. even, spelling, punctuation and grammar are on the block. Feel free to look around on this new site, there will be much information added in the coming weeks on every aspect of tuning the dry hits, and some general nitrous write ups. thanks
Robert56 Dry Timing Pull How-To
Robert
Robert56 Dry Timing Pull How-To
Robert
#2
TECH Addict
iTrader: (21)
Joined: Nov 2005
Posts: 2,209
Likes: 0
Received 0 Likes
on
0 Posts
From: Maine USA
You need to run it by an idiot...I am your man ! LOL I am on it like a seaman on a crack *****.
OK,
1. Line 6 under premise..."But." is not a sentence
Looks great I understood it. You going to cover the resistor trick as well, for those with out tuning software?
Jim
OK,
1. Line 6 under premise..."But." is not a sentence
Looks great I understood it. You going to cover the resistor trick as well, for those with out tuning software?
Jim
Last edited by Beer99C5; 12-02-2007 at 01:35 AM.
#5
1. "This write up will explain how-to pull..."
no "-". A "how-to" is an indication of a document explaining how to do something. You are simply stating how to do it, not referring to the article here.
2. "..any tuner program" should be "any tuning program". Tuner is a person who tunes.
3. "So for instance, calculated.." should be "So, for instance, calculated".
4. "select 26* degrees" The * and "degrees" are redundant.
5. "I do this by selecting the none needed columns in the lettered box at top and deleting them" I know what you mean here, but it is unclear. Perhaps "selecting the columns not needed.."
6. "in HP Tuner (below)" The program name is "HPtuners".
7. "however, because of my glitch I was" should be "however, because of my glitch, I was.."
8. "excel" should always be capitalized. Most are.
Now, having written all that, I have to say that it was pretty straight forward the first time I used it. I followed the instructions and it worked perfectly. I just changed my plugs for the first time since I installed the n20 (4 bottles ago) and they looked perfect. It was a shame to throw them out.
Thanks Robert.
as a side note/story... I was playing with another vette a few weeks ago. I all I knew was that it was also A4 but I knew he had headers/intake/borla x exh. I was surprized when we jumped on it and I wasn't pulling him. It was almost dead even... until the top top end where he actually was pulling me a little (very little, but did). When we stopped and talked, I found out he had a 125 dry shot. LOL... not end of story though.. So we laughed about it. I figured his 125 shot and headers were equivalent to my 150 shot... when he told me... he also had a LS6 motor but never tuned his n2o. Bahahaha
Tuning is your friend.
no "-". A "how-to" is an indication of a document explaining how to do something. You are simply stating how to do it, not referring to the article here.
2. "..any tuner program" should be "any tuning program". Tuner is a person who tunes.
3. "So for instance, calculated.." should be "So, for instance, calculated".
4. "select 26* degrees" The * and "degrees" are redundant.
5. "I do this by selecting the none needed columns in the lettered box at top and deleting them" I know what you mean here, but it is unclear. Perhaps "selecting the columns not needed.."
6. "in HP Tuner (below)" The program name is "HPtuners".
7. "however, because of my glitch I was" should be "however, because of my glitch, I was.."
8. "excel" should always be capitalized. Most are.
Now, having written all that, I have to say that it was pretty straight forward the first time I used it. I followed the instructions and it worked perfectly. I just changed my plugs for the first time since I installed the n20 (4 bottles ago) and they looked perfect. It was a shame to throw them out.
Thanks Robert.
as a side note/story... I was playing with another vette a few weeks ago. I all I knew was that it was also A4 but I knew he had headers/intake/borla x exh. I was surprized when we jumped on it and I wasn't pulling him. It was almost dead even... until the top top end where he actually was pulling me a little (very little, but did). When we stopped and talked, I found out he had a 125 dry shot. LOL... not end of story though.. So we laughed about it. I figured his 125 shot and headers were equivalent to my 150 shot... when he told me... he also had a LS6 motor but never tuned his n2o. Bahahaha
Tuning is your friend.
Last edited by Todd157k; 12-03-2007 at 09:33 PM.
Trending Topics
#9
Thread Starter
TECH Senior Member
iTrader: (2)
1. "This write up will explain how-to pull..."
no "-". A "how-to" is an indication of a document explaining how to do something. You are simply stating how to do it, not referring to the article here.
2. "..any tuner program" should be "any tuning program". Tuner is a person who tunes.
3. "So for instance, calculated.." should be "So, for instance, calculated".
4. "select 26* degrees" The * and "degrees" are redundant.
5. "I do this by selecting the none needed columns in the lettered box at top and deleting them" I know what you mean here, but it is unclear. Perhaps "selecting the columns not needed.."
6. "in HP Tuner (below)" The program name is "HPtuners".
7. "however, because of my glitch I was" should be "however, because of my glitch, I was.."
8. "excel" should always be capitalized. Most are.
Now, having written all that, I have to say that it was pretty straight forward the first time I used it. I followed the instructions and it worked perfectly. I just changed my plugs for the first time since I installed the n20 (4 bottles ago) and they looked perfect. It was a shame to throw them out.
Thanks Robert.
as a side note/story... I was playing with another vette a few weeks ago. I all I knew was that it was also A4 but I knew he had headers/intake/borla x exh. I was surprized when we jumped on it and I wasn't pulling him. It was almost dead even... until the top top end where he actually was pulling me a little (very little, but did). When we stopped and talked, I found out he had a 125 dry shot. LOL... not end of story though.. So we laughed about it. I figured his 125 shot and headers were equivalent to my 150 shot... when he told me... he also had a LS6 motor but never tuned his n2o. Bahahaha
Tuning is your friend.
no "-". A "how-to" is an indication of a document explaining how to do something. You are simply stating how to do it, not referring to the article here.
2. "..any tuner program" should be "any tuning program". Tuner is a person who tunes.
3. "So for instance, calculated.." should be "So, for instance, calculated".
4. "select 26* degrees" The * and "degrees" are redundant.
5. "I do this by selecting the none needed columns in the lettered box at top and deleting them" I know what you mean here, but it is unclear. Perhaps "selecting the columns not needed.."
6. "in HP Tuner (below)" The program name is "HPtuners".
7. "however, because of my glitch I was" should be "however, because of my glitch, I was.."
8. "excel" should always be capitalized. Most are.
Now, having written all that, I have to say that it was pretty straight forward the first time I used it. I followed the instructions and it worked perfectly. I just changed my plugs for the first time since I installed the n20 (4 bottles ago) and they looked perfect. It was a shame to throw them out.
Thanks Robert.
as a side note/story... I was playing with another vette a few weeks ago. I all I knew was that it was also A4 but I knew he had headers/intake/borla x exh. I was surprized when we jumped on it and I wasn't pulling him. It was almost dead even... until the top top end where he actually was pulling me a little (very little, but did). When we stopped and talked, I found out he had a 125 dry shot. LOL... not end of story though.. So we laughed about it. I figured his 125 shot and headers were equivalent to my 150 shot... when he told me... he also had a LS6 motor but never tuned his n2o. Bahahaha
Tuning is your friend.
Now on to the nit picking:
1 Isn't the How-To in the lead statement referring to the following document?
2 Busted, however, I think tuner is becoming slang for a few different meanings?
3 I think it can be either way as an introductory statement, So for instance, or So, for instance. i think it's up to the author. where's my beautiful English teacher when I need her.
4 Yep, got me hear for sure, redundant it is.
5 This is what I mean, it may make sense to me, but if it's unclear to a gear head like you, it prob does need attention.
6 Busted again, thanks.
7 Busted once again
8 Busted, yes all trade marked names should be capitalized.
Thanks a bunch though, these are the issues that need to be addressed.
Robert
#11
Jesus freaking Christ, you must be a grammer/English teacher or a geek to the 3rd degree, of course I am joking, being a geek can be a good thing. you know in college I always got a top grade on tech papers, looks as though I need to proof read a bit better, but don't have the goodies like in Word. Actually, before seeing your post i went on the site and found numerous tech contradictions and the like. Oh, well, we'll get it ironed out.
Now on to the nit picking:
1 Isn't the How-To in the lead statement referring to the following document?
2 Busted, however, I think tuner is becoming slang for a few different meanings?
3 I think it can be either way as an introductory statement, So for instance, or So, for instance. i think it's up to the author. where's my beautiful English teacher when I need her.
4 Yep, got me hear for sure, redundant it is.
5 This is what I mean, it may make sense to me, but if it's unclear to a gear head like you, it prob does need attention.
6 Busted again, thanks.
7 Busted once again
8 Busted, yes all trade marked names should be capitalized.
Thanks a bunch though, these are the issues that need to be addressed.
Robert
Now on to the nit picking:
1 Isn't the How-To in the lead statement referring to the following document?
2 Busted, however, I think tuner is becoming slang for a few different meanings?
3 I think it can be either way as an introductory statement, So for instance, or So, for instance. i think it's up to the author. where's my beautiful English teacher when I need her.
4 Yep, got me hear for sure, redundant it is.
5 This is what I mean, it may make sense to me, but if it's unclear to a gear head like you, it prob does need attention.
6 Busted again, thanks.
7 Busted once again
8 Busted, yes all trade marked names should be capitalized.
Thanks a bunch though, these are the issues that need to be addressed.
Robert
If it was "This write up is a how-to on pulling timing.." then, yes I would agree. A "how-to" is a noun whereas "how to" is a verb.
2. Correct, and I understand the usage. Not grammatically correct. Just getting my degree in geekness. How did I do?
#12
Beer is probably fast asleep by now.. out in the storms. ewwww.
edit: on second thought.. You're in the middle of some sht weather too!!
#13
TECH Addict
iTrader: (21)
Joined: Nov 2005
Posts: 2,209
Likes: 0
Received 0 Likes
on
0 Posts
From: Maine USA
Actually I am 12-13 hours ahead of ya, its 80 degrees here in Singapore (LOL sorry still on my laptop!) Mid-day...preparing for the Christening of my Semi Submersible Drilling Vessel
Copyright hold down Alt then 0169 on the Num pad
Copyright hold down Alt then 0169 on the Num pad
Last edited by Beer99C5; 12-04-2007 at 01:12 AM.
#14
TECH Resident
iTrader: (6)
Joined: Aug 2006
Posts: 766
Likes: 0
Received 0 Likes
on
0 Posts
From: Hampstead, MD
Start -> Run
"charmap"
Character Map for all of your fonts along with all corresponding Alt keypad combinations.
۩Also has the ability to copy and paste symbols if you're too lazy to type.۩
"charmap"
Character Map for all of your fonts along with all corresponding Alt keypad combinations.
۩Also has the ability to copy and paste symbols if you're too lazy to type.۩
#16