Just finished my HSW Plate Kit, etc.
02-12-2008, 07:47 PM
#1
Just finished my HSW Plate Kit, etc. Just finished most of my HSW Plate Kit 75-150HP, purge, FPSS, bottle warmer, bottle opener and Switch panel. What a job wiring everything up. I still need to clean up the wiring some. The astray panel does not fit very well. I also just replaced my plugs TR6's.
The only item I have tested is the opener and the purge.
I still need a remote pressure gauge and need to install my blow tube (I filled the bottle before I installed it
).
Bill
The only item I have tested is the opener and the purge.
I still need a remote pressure gauge and need to install my blow tube (I filled the bottle before I installed it
).Bill
Trending Topics
02-13-2008, 11:16 AM
#10
11 Second Club
iTrader: (9)
Join Date: Mar 2007
Location: Avondale, AZ
Posts: 1,016
Likes: 0
Received 0 Likes
on
0 Posts
x2..everyone and there brother has one for a free shirt or kit. Wouldnt be so bad if the people from nitrous outlet changed there sig to something different so you could tell when scrolling through. I scroll through a post and see the sig and think something important was said
02-13-2008, 01:06 PM
#12
12 Second Club
Join Date: Aug 2007
Location: Rowlett
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
there is alot of red in there.. I was planning on putting all chrome loom in mine, but now I am having 2nd thoughts on that...
What kind of looks odd is your MAF... does not look like you have 1...
What kind of looks odd is your MAF... does not look like you have 1...
02-13-2008, 03:43 PM
#14
12 Second Club
Join Date: Aug 2007
Location: Rowlett
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
I was like, I am going to post saying where the hell is the MAF.. but put the looks like you dont have one..
duh.. you dont... nice..
