Some parts I took off the car yesterday
07-26-2009, 04:57 PM
#1
On The Tree
Thread Starter
iTrader: (16)
Join Date: Jan 2007
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Some parts I took off the car yesterday SX fuel pump with filter. 10an ports with reducers down to 8an. The pump is 300 new and the filter is 90. It has a new micron filter inside the filter housing as well. Its rated for 1000 hp at 45 psi and flows 80 gph at 12 volts for the 45 psi and runs 120 gph at 12 volts for 10 psi (carb) and rated to 1300 hp for carb vehicles. Also works for both Gas and Alcohol. Will take 200.00 shipped.
ABS unit off of my car and worked perfectly. 35 shipped
Brake master cylinder off my car. Also works perfect. 35 shipped
Mcleod adjustable master cylinder. The piece alone is over 300 new at Summit. You will get everything in the pic for 250 shipped. Never leaked and works perfect. Its setup for an LT1 but if you need it for the LSx cars you will just need to switch out the braided line.
Fuel tank with sump welded in and Walbro 255 pump in the tank. The housing for the fuel filter has been flared for braided fuel lines. I will sell everything in the pic for 150 but you will have to come and get it.
ABS unit off of my car and worked perfectly. 35 shipped
Brake master cylinder off my car. Also works perfect. 35 shipped
Mcleod adjustable master cylinder. The piece alone is over 300 new at Summit. You will get everything in the pic for 250 shipped. Never leaked and works perfect. Its setup for an LT1 but if you need it for the LSx cars you will just need to switch out the braided line.
Fuel tank with sump welded in and Walbro 255 pump in the tank. The housing for the fuel filter has been flared for braided fuel lines. I will sell everything in the pic for 150 but you will have to come and get it.
07-26-2009, 04:58 PM
#2
On The Tree
Thread Starter
iTrader: (16)
Join Date: Jan 2007
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Glove box out of my car- 40 shipped
Dash out of my car with passenger side airbag - 150 but this too will be a pickup item. Shoes will cost extra
DMH dual 2.5" electric cutouts. One of the wire housings got a little hot but does not effect how it functions. When you connect the wires all you would have to do is tape the two housings together. Will sell the kit together for 200 shipped or if you need the manual cutout part I have a new set that I will put in the package for 230.00 shipped.
Dash out of my car with passenger side airbag - 150 but this too will be a pickup item. Shoes will cost extra
DMH dual 2.5" electric cutouts. One of the wire housings got a little hot but does not effect how it functions. When you connect the wires all you would have to do is tape the two housings together. Will sell the kit together for 200 shipped or if you need the manual cutout part I have a new set that I will put in the package for 230.00 shipped.
07-26-2009, 04:59 PM
#3
On The Tree
Thread Starter
iTrader: (16)
Join Date: Jan 2007
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Nitrous blowdown tube- 15 shipped
NOS bottle heater with relay - 75 shipped
Bottle heater - 50 shipped
Fuel system
Braided fuel lines. Feed line is 8an with 6an fittings for the fuel rail. Return line is 6an with 6an fitting for the fuel rail and 4an for the fuel pump housing. Also has an inline fuel filter that has 8an ends. I had both an intank pump and an external pump hooked up to the sump, so I have a Magnafuel Y adapter that is 8an on all three corners. You can see it in the pic that is attached to the filter. All of this went from the fuel tank, up the driver side where the stock lines were. Then up inside of the wheel well and out the factory spot on the inner fender. If someone wants it all I will ship it for 220. If someone is not planning on running two pumps I will take the Magnafuel Y adapter and the extra Fuel line out and sell everything for 200 shipped.
NOS bottle heater with relay - 75 shipped
Bottle heater - 50 shipped
Fuel system
Braided fuel lines. Feed line is 8an with 6an fittings for the fuel rail. Return line is 6an with 6an fitting for the fuel rail and 4an for the fuel pump housing. Also has an inline fuel filter that has 8an ends. I had both an intank pump and an external pump hooked up to the sump, so I have a Magnafuel Y adapter that is 8an on all three corners. You can see it in the pic that is attached to the filter. All of this went from the fuel tank, up the driver side where the stock lines were. Then up inside of the wheel well and out the factory spot on the inner fender. If someone wants it all I will ship it for 220. If someone is not planning on running two pumps I will take the Magnafuel Y adapter and the extra Fuel line out and sell everything for 200 shipped.
Trending Topics
07-27-2009, 04:10 PM
#8
.
