Orygun guys?
#2101
11 Second Club
iTrader: (37)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Thumb](https://ls1tech.com/forums/images/smilies2/thumb.gif)
Ya, everyone was talking about the lack of traction. The guy in the white Barracuda with the wheelie bars got pissed off and left early. I ended up dropping the rear control arms back down to the bottom hole while I was there, and it helped alot. Best 60' time was a 1.69 so the track seemed to get better as the night went on. Ended up running a string of 11.teens.
11.19 @ 125.61
11.16 @ 125.48
11.13 @ 125.89
11.15 @ 125.89
11.08 @ 125.92 <-- new pb mph
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Mike
#2103
On The Tree
iTrader: (4)
Join Date: Jul 2008
Location: St. Helens, Oregon
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah, I was busy trying to get my tune right, eventually got pissed off and left early (also got a mark for being too loud, stupid 16second civic....). It's running so rich, can't figure out why. I even had some traction problems, just wasn't good.
My little sister video taped some of your runs, I'll post what I have tonight.
My best (still not bad for a daily driver v6):
60' - 2.06 (bad, gotta work on the launch)
1/8- 9.065
mph- 77.81
1/4- 14.182
mph- 95.58
My little sister video taped some of your runs, I'll post what I have tonight.
My best (still not bad for a daily driver v6):
60' - 2.06 (bad, gotta work on the launch)
1/8- 9.065
mph- 77.81
1/4- 14.182
mph- 95.58
#2104
11 Second Club
iTrader: (37)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah, I was busy trying to get my tune right, eventually got pissed off and left early (also got a mark for being too loud, stupid 16second civic....). It's running so rich, can't figure out why. I even had some traction problems, just wasn't good.
My little sister video taped some of your runs, I'll post what I have tonight.
My best (still not bad for a daily driver v6):
60' - 2.06 (bad, gotta work on the launch)
1/8- 9.065
mph- 77.81
1/4- 14.182
mph- 95.58
My little sister video taped some of your runs, I'll post what I have tonight.
My best (still not bad for a daily driver v6):
60' - 2.06 (bad, gotta work on the launch)
1/8- 9.065
mph- 77.81
1/4- 14.182
mph- 95.58
That's not a bad run. Work on the launch and you'll get a 13.8 pretty easily.
Mike
#2107
On The Tree
iTrader: (4)
Join Date: Jul 2008
Location: St. Helens, Oregon
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah we'll meet up one of these days lol... There was another teal car there "Jsafe" and I did get to meet him yesterday as we were both going through tech at the same time. I was pretty busy making suspension adjustments. Everytime I did have some free time, I couldn't find your car anywhere.
That's not a bad run. Work on the launch and you'll get a 13.8 pretty easily.
Mike
That's not a bad run. Work on the launch and you'll get a 13.8 pretty easily.
Mike
I saw that other teal car, messed me up for a second. Thought to myself "Am I in my car?" lol
I saw you over by the fence with the rear jacked up a few times. First time I saw it I was thinking you broke something. Wish the track prep was better, it would've been a great night to get some better times.
I'm uploading video now.
#2108
On The Tree
iTrader: (4)
Join Date: Jul 2008
Location: St. Helens, Oregon
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ignore my sister and dad, lol
http://www.youtube.com/watch?v=9sg9RjOW1PI
http://www.youtube.com/watch?v=LNnyoSWwTyI
My best
http://www.youtube.com/watch?v=qHjh8-SaBfQ
http://www.youtube.com/watch?v=9sg9RjOW1PI
http://www.youtube.com/watch?v=LNnyoSWwTyI
My best
http://www.youtube.com/watch?v=qHjh8-SaBfQ
#2110
TECH Enthusiast
iTrader: (4)
Join Date: Aug 2009
Location: longview, wa
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
[QUOTE=tmoney223;12342707]
Hey same here!!! 408 or 427 wich ever I can get my hands on.![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
car is running good still needs a tune on it, cause it still pinging at high RPM's.
.. Yeah that kind of sounds like bad plugs if it's at all range of R's. Or a fuel problem?
And phill. I talked to pat and he is going to sell it.
I tried to talk him out of it, but he made some good points. He is thinking about a C5 or a LT4 C4 ya im not too worried i have an extra car anyway lol. idk for just a little more money u can get a 414ci motor from texas speed, so that might be worth it. im having trouble deciding on aluminum block or iron block though. i think the 402 ls2 would be a good one too
Hey same here!!! 408 or 427 wich ever I can get my hands on.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
car is running good still needs a tune on it, cause it still pinging at high RPM's.
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
And phill. I talked to pat and he is going to sell it.
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
#2111
11 Second Club
iTrader: (37)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Thumb](https://ls1tech.com/forums/images/smilies2/thumb.gif)
Those two runs you posted of mine were before I changed the lower control arms. That setting was bad news for traction as you can see lol.... Even that Barracuda with the big ol' slicks couldn't hook at the beginning of the night. I downloaded my vids off the video camera last night so I'll post up some of those.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Mike
#2112
11 Second Club
iTrader: (37)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here's a few vids from this last Saturday 10-10-09.
http://www.youtube.com/watch?v=dgqVD7d6C9w
http://www.youtube.com/watch?v=J16gE3BlgNM
http://www.youtube.com/watch?v=uzR3miHpVBU
Mike
http://www.youtube.com/watch?v=dgqVD7d6C9w
http://www.youtube.com/watch?v=J16gE3BlgNM
http://www.youtube.com/watch?v=uzR3miHpVBU
Mike
#2117
11 Second Club
iTrader: (37)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
-Car really needs a drag race type rear sway bar to keep the car level. In slow motion, you can see the car rock to one side on the launch, unloading the other tire, then it rocks back and settles about 20-30' out. A drag bar would keep it level on the launch, keeping both rear tires planted harder at the very beginning. This is main thing the car needs at the moment, but they cost about 300-400.00 and it's money I don't have at the moment.
-Another is that it's a relatively small tire for the power level. I should be rolling a 27"-11.50 on a 10" wide wheel with a 4.11 gear, but I'm working with a 26"-10.50 on a 8" wheel and a 3.89 gear. The lower numerical gear, the harder it is to find that traction "window" and launch rpm. Right now, I'm only launching at 5k rpm..... With a bigger tire I could be launching at 6k+ and getting the thing to move the fu(k out.... lol....
-Also, with a stick car and a slick (auto's are way different though), you don't want the car to dead hook unless you have the power to carry the car through without bogging. With the 3.89 gears I have, it bogs on a dead hook. The best launch with my power level is going to be a slight spin off the line to keep the wheel speed up without bogging the engine. Right now, the wheel speed is just too high and I can't do anything about it without lowering rpm's and bogging. It's frustrating.... but that's racing..
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Mike
#2118
TECH Apprentice
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Alot of factors are involved and it's very dynamic.
-Car really needs a drag race type rear sway bar to keep the car level. In slow motion, you can see the car rock to one side on the launch, unloading the other tire, then it rocks back and settles about 20-30' out. A drag bar would keep it level on the launch, keeping both rear tires planted harder at the very beginning. This is main thing the car needs at the moment, but they cost about 300-400.00 and it's money I don't have at the moment.
-Another is that it's a relatively small tire for the power level. I should be rolling a 27"-11.50 on a 10" wide wheel with a 4.11 gear, but I'm working with a 26"-10.50 on a 8" wheel and a 3.89 gear. The lower numerical gear, the harder it is to find that traction "window" and launch rpm. Right now, I'm only launching at 5k rpm..... With a bigger tire I could be launching at 6k+ and getting the thing to move the fu(k out.... lol....
-Also, with a stick car and a slick (auto's are way different though), you don't want the car to dead hook unless you have the power to carry the car through without bogging. With the 3.89 gears I have, it bogs on a dead hook. The best launch with my power level is going to be a slight spin off the line to keep the wheel speed up without bogging the engine. Right now, the wheel speed is just too high and I can't do anything about it without lowering rpm's and bogging. It's frustrating.... but that's racing..![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Mike
-Car really needs a drag race type rear sway bar to keep the car level. In slow motion, you can see the car rock to one side on the launch, unloading the other tire, then it rocks back and settles about 20-30' out. A drag bar would keep it level on the launch, keeping both rear tires planted harder at the very beginning. This is main thing the car needs at the moment, but they cost about 300-400.00 and it's money I don't have at the moment.
-Another is that it's a relatively small tire for the power level. I should be rolling a 27"-11.50 on a 10" wide wheel with a 4.11 gear, but I'm working with a 26"-10.50 on a 8" wheel and a 3.89 gear. The lower numerical gear, the harder it is to find that traction "window" and launch rpm. Right now, I'm only launching at 5k rpm..... With a bigger tire I could be launching at 6k+ and getting the thing to move the fu(k out.... lol....
-Also, with a stick car and a slick (auto's are way different though), you don't want the car to dead hook unless you have the power to carry the car through without bogging. With the 3.89 gears I have, it bogs on a dead hook. The best launch with my power level is going to be a slight spin off the line to keep the wheel speed up without bogging the engine. Right now, the wheel speed is just too high and I can't do anything about it without lowering rpm's and bogging. It's frustrating.... but that's racing..
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Mike
#2120
11 Second Club
iTrader: (37)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Wow that is dynamic! But that all makes sense. Is madman bars kinda what your talkin about with the drag bars? Well dam I guess the good thing is you are pretty much there without any of that special stuff!!! Thanks for the info too man dam there is alot to it huh lol.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
UMI, Spohn and BMR all make rear sway bars specific to drag cars.
Mike