Orygun guys?
#2281
11 Second Club
iTrader: (37)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
A little of this and that lol...
I tore down the 387, looks like the crank is prolly gone, as well as the cam. I spoke with Steve at Race Engine Development about that MID block. MTI did the original sleeve install and they did it wrong. Apparently the machining needed to be done as a wet lubricated cnc procedure, and they did it dry instead. That eventually causes uneven block stress/cylinder bore distortion and ultimately tries to seize up the piston/s in the bore. After that, there's nothing left to give but the connecting rod...... It's no wonder MTI Houston went **** up.
I did pick up an iron 6.0l truck shortblock so I'm trying to decide how to go with that. With money being tight at the moment, I might just do a mild rebuild on this 6.0 shortblock and stuff a big cam in it, although I'd at least like to install some H-beams. We'll see how it goes.....![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Mike
I tore down the 387, looks like the crank is prolly gone, as well as the cam. I spoke with Steve at Race Engine Development about that MID block. MTI did the original sleeve install and they did it wrong. Apparently the machining needed to be done as a wet lubricated cnc procedure, and they did it dry instead. That eventually causes uneven block stress/cylinder bore distortion and ultimately tries to seize up the piston/s in the bore. After that, there's nothing left to give but the connecting rod...... It's no wonder MTI Houston went **** up.
I did pick up an iron 6.0l truck shortblock so I'm trying to decide how to go with that. With money being tight at the moment, I might just do a mild rebuild on this 6.0 shortblock and stuff a big cam in it, although I'd at least like to install some H-beams. We'll see how it goes.....
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Mike
#2282
Banned
iTrader: (115)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
A little of this and that lol...
I tore down the 387, looks like the crank is prolly gone, as well as the cam. I spoke with Steve at Race Engine Development about that MID block. MTI did the original sleeve install and they did it wrong. Apparently the machining needed to be done as a wet lubricated cnc procedure, and they did it dry instead. That eventually causes uneven block stress/cylinder bore distortion and ultimately tries to seize up the piston/s in the bore. After that, there's nothing left to give but the connecting rod...... It's no wonder MTI Houston went **** up.
I did pick up an iron 6.0l truck shortblock so I'm trying to decide how to go with that. With money being tight at the moment, I might just do a mild rebuild on this 6.0 shortblock and stuff a big cam in it, although I'd at least like to install some H-beams. We'll see how it goes.....![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Mike
I tore down the 387, looks like the crank is prolly gone, as well as the cam. I spoke with Steve at Race Engine Development about that MID block. MTI did the original sleeve install and they did it wrong. Apparently the machining needed to be done as a wet lubricated cnc procedure, and they did it dry instead. That eventually causes uneven block stress/cylinder bore distortion and ultimately tries to seize up the piston/s in the bore. After that, there's nothing left to give but the connecting rod...... It's no wonder MTI Houston went **** up.
I did pick up an iron 6.0l truck shortblock so I'm trying to decide how to go with that. With money being tight at the moment, I might just do a mild rebuild on this 6.0 shortblock and stuff a big cam in it, although I'd at least like to install some H-beams. We'll see how it goes.....
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Mike
MIT had someone working for them that hosed all the blocks he did. He then went on to open up his own shop. But this was well before MTI went belly up but his shotty work does continue
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
We can do a rotating assembly with bearings balanced for cheap money. If we use the C series crank and Scat rods, we save a ton of money that way. Get it all for under 2k balanced with bearings and then your into a 408 for a cheap as you can be. Get the block prepped and your good to go. OR go with come Compstar rods for less work. But there are options !
#2283
On The Tree
iTrader: (4)
Join Date: Jul 2008
Location: St. Helens, Oregon
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Anyone know where to get a low-cost master rebuild kit for a th400? I've got one in the barn that I'm going to fix up with a shift improver kit for a side project. Rock Auto has one for about $85, and summit has a b&m shift improver kit for about $30. Summit's house line master kit is about $120, seems to have the same parts as RA's.
#2287
On The Tree
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Those look god phill.
where did you get the paint cause I wanna do something like that also.
So I got a question. This has happen to me three times now. When I'm hauling ***, like doing a 100 and then I slam on the breaks for the red light, come to a stop, an then I get this blue haze coming from the back. It's oil and not break smoke cause I can smell it. I'm thinking my rings are bad or is it from the oil not being picked up cause of the stoping force and pushing it all the way forward. Any ideas?
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
So I got a question. This has happen to me three times now. When I'm hauling ***, like doing a 100 and then I slam on the breaks for the red light, come to a stop, an then I get this blue haze coming from the back. It's oil and not break smoke cause I can smell it. I'm thinking my rings are bad or is it from the oil not being picked up cause of the stoping force and pushing it all the way forward. Any ideas?
#2289
On The Tree
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Sweet I'm thinkg of doing a green theme, well maybe or even a red, any suggestions?. Haven't been up to much lately. I just tried to race a 94or95 cobra but he didn't want any. Wich was probably good a good idea from him lol. Also working two jobs is starting to wear on me but I got to think of my car and getting **** done but that also sucks cause of Christmas. What you been up to? And yea we have to kick it soon. Also trying to get a xbox so I can kick your guys *** at forza. Lol
#2290
TECH Apprentice
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey Brandon! This is one of the few ws6's with an m6 that are for sale in the area so have your buddy check this one out and its at a dealer!!
http://www.autotrader.com/fyc/vdp.js...standard=false
http://www.autotrader.com/fyc/vdp.js...standard=false
#2296
TECH Apprentice
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey poncho! You better tell your buddy to get this one it popped up today and probably wont last long!!!!
http://portland.craigslist.org/wsc/ctd/1488943403.html
http://portland.craigslist.org/wsc/ctd/1488943403.html
#2297
TECH Apprentice
iTrader: (6)
Join Date: Oct 2007
Location: Newberg Oregon
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
thanks phil I told him. I might want to go check it out and see if they would let me test drive it. The poncho has been down for a few weeks but, I now have the 9" in and am just messing with the brake lines and such. I have to wait until they send me a fill plug cap. They must have forgotten it.
#2298
Staging Lane
iTrader: (15)
Join Date: Feb 2008
Location: Hillsboro
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey anyone got a 220 welder they're willing to rent, none of the shops I frequent here have anything higher than a 110? Ive got a set of sway bars, 3 point subframe connectors, lca's, and a tunnel mounted torque arm torque arm w/driveshaft safety loop hidden in my living room behind my sofa just waiting to be installed. Can't find a shop that can weld 1/4" steel, and my wife's driving me crazy....Need to get this stuff installed before the axles and driveshaft gets here and she really flips out...lol.
#2300
On The Tree
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hey what's with the crapy borg-worner trans????? Where's the T-56 tremecIII
Hey poncho! You better tell your buddy to get this one it popped up today and probably wont last long!!!!
http://portland.craigslist.org/wsc/ctd/1488943403.html
http://portland.craigslist.org/wsc/ctd/1488943403.html