*02WS6TURK*

iTrader: (13)

That was the first thing I did to both my fbods. Looks ten times cleaner. I used my heat gun and some rubbing alcohol. Paint thinner for anything real hard to get off. Buttery smooth!

78_elky

I think it will look better, I keep wanting to do it to my Camaro but never seem to get around to it.
Jess

Mikey 97Z M6

iTrader: (37)

You're secretly trying to lose all the weight out of the car arent you? LOL... j/k.

Yeah I just did this to the Tahoe about 3 weeks ago. Looks much cleaner now. I also removed all the badges at the same time. That eraser wheel that 3M makes, works like a charm at removing the sticky tape from the car. Kinda spendy little bastard but it saved alot of time and elbow grease.

Mike

wpe

You can do what I did, wait until you are into your 50s before having any babies. My second son will be here sometime around the first week of July. I will be 57

zlicious94

iTrader: (1)

^ Congrats! Nothing wrong with waiting thats what Im doing I think lol

*02WS6TURK*

iTrader: (13)

Are you going to name your firstborn 383 stroker or Advanced Induction D'Avanzo?

Tyler_LS1

iTrader: (2)

Congrats on the kid, hope it goes well! Idk my fiancé will kill me if I told her we're waiting till 50 to have kids lol. If it was up to her we would have kids right away but we can't swing it financially yet

zlicious94

iTrader: (1)

No his name will be Piston!

SsSteven

That reminds me of Joseph Dominick Pistone, AKA Donnie Brasco

SalvageZ28

iTrader: (4)

Tyler you can swing it just fine think of the money you get back in taxes=)

tmoney223

iTrader: (2)

But taxes doesnt over come on how much you spend on the kid for the year. Just wait tell you guys are good and ready.

Tyler_LS1

iTrader: (2)

ya but its not nearly enough lol, besides we want to enjoy married life for a while before kids

02sslayer

iTrader: (4)

good idea tyler, no need to rush into these things. wait till you are where u wana be in your career and have some fun dude.

zlicious94

iTrader: (1)

Good deal for any of the corvette fellas!

http://portland.craigslist.org/clc/pts/3026274499.html

02sslayer

iTrader: (4)

so i called the local chevy dealer to order a LS spindle and these jokers tell me it costs 420$, that seems pretty outragous to me. well i found one in a junkyard for 50$ after i get the front end fixed im gonna take that FAST off and see if there is some problem with it. i may have to buy a new 92 or somethin, which wont be to bad since i have thev NW90 allready

02sslayer

iTrader: (4)

got car rolling at least. it still has a number 8 misfire, also found some vacume leaks and got those fixed. gonna buy new plugs tomorrow and check a coil pack

SalvageZ28

iTrader: (4)

Make sure your intake bolts are snug. Or get new intake gaskets and throw them on

*02WS6TURK*

iTrader: (13)

I'm almost a 100% sure it's not his intake bolts, but a bad intake itself. He bought the intake and installed it knowing it had a few cracks/bad spots on it. I would swap your old LS6 back on Joe and part out that FAST 90.

SalvageZ28

iTrader: (4)

I thought he fixed it.

Rockin C Racing

iTrader: (3)

I think he sold the LS6