Orygun guys?
#7624
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If you would be willing to let him borrow it I think that's more what he's looking for just something he can use to help locate mounts, right at moment he is searching for a 5.3 6.0 or any ls based motor but was hoping to start mocking up shortly and didn't know how long till he can find/afford a motor due to buying house.
#7625
#7626
TECH Apprentice
iTrader: (6)
Join Date: Oct 2007
Location: Newberg Oregon
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
On jack stands lol, I am going to start making progress on it this weekend. I think I will just take the heads in and have them done. Is your buddys name Nick by any chance? I talked to somebody about my block but lost his number.
#7630
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Salvage when u ran the z06 wheels on the camaro did u have any spacer? Mine is rubbing inner fender panhard seems to be adjusted close both sides are hitting just slightly like it needs a very small spacer. It only hits when I push it hard in the corners normal drive and straight line seems to be ok
#7634
Teching In
iTrader: (4)
Join Date: Jul 2009
Location: Brush prairie,wa
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Salvage when u ran the z06 wheels on the camaro did u have any spacer? Mine is rubbing inner fender panhard seems to be adjusted close both sides are hitting just slightly like it needs a very small spacer. It only hits when I push it hard in the corners normal drive and straight line seems to be ok