Orygun guys?
#7601
7 Second Club
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Finally get all my junk back on Saturday. What a headache to keep the engine build moving forward. New bump stick with more lift and 10 degrees more duration should wake things up a little. Bringing compression up from 8.5 to about 8.9 as well.
Did some more investigating, and one thing on my mind was the MAF. Just so happens it still had the stock MAF
no wonder **** melted. Picking up a 2 bar on Saturday along with everything else. I think I'll be up and running by Tuesday/Wednesday ![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
Sure have missed driving this thing.
Did some more investigating, and one thing on my mind was the MAF. Just so happens it still had the stock MAF
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
Sure have missed driving this thing.
#7602
Teching In
iTrader: (4)
Join Date: Jul 2009
Location: Brush prairie,wa
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Finally get all my junk back on Saturday. What a headache to keep the engine build moving forward. New bump stick with more lift and 10 degrees more duration should wake things up a little. Bringing compression up from 8.5 to about 8.9 as well.
Did some more investigating, and one thing on my mind was the MAF. Just so happens it still had the stock MAF
no wonder **** melted. Picking up a 2 bar on Saturday along with everything else. I think I'll be up and running by Tuesday/Wednesday ![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
Sure have missed driving this thing.
Did some more investigating, and one thing on my mind was the MAF. Just so happens it still had the stock MAF
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
Sure have missed driving this thing.
#7619
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Anyone have a spare mock up block or know of good source one of my buddies is staring to build chassis for his 62 truck and is going to swap to ls stlye motor and so was looking to use a block to mock up mounts.