front license plate holes
10-10-2009, 01:46 PM
#1
front license plate holes alright so I dont do front license plates on any of my cars, i had the bracket removed on the nose of the TA and it has three little holes in the front, how would you go about fixing this? ballpark figure to fix?
thanks!
thanks!
10-10-2009, 03:02 PM
#4
TECH Fanatic
iTrader: (1)
Join Date: Aug 2005
Location: San Diego
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
3m plastic bumper repair. It's a filler, comes in rigid and felxible, I'd go flexible. Use it an a few applications to build it up higher than the holes and sand, primer and paint.
10-10-2009, 05:15 PM
#6
How nice is the car, and what do you expect the finished product to be? The holes need to be ground out, and feathered back before the plastic repair material is applied. Best for a good bodyshop or bodyman, painter sidejob.
10-10-2009, 05:29 PM
#7
yeah that's what i was thinking, i'm going to get that fixed, the roof blacked out, and the CETA mod done all at the same time. i just dont want it to be to expensive as this car is just a daily i bought so i could get around CA
Trending Topics
10-10-2009, 06:49 PM
#8
TECH Addict
iTrader: (4)
Join Date: Feb 2009
Location: Savannah, GA
Posts: 1,998
Likes: 0
Received 0 Likes
on
0 Posts
i unfortunately had those three same holes.. and then had a run in with a tree stump in my friends lawn..
the front bumper got ordered and put on.. thats how i did mine
the front bumper got ordered and put on.. thats how i did mine
