Smoothing out a console.
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I am looking to pickup a 98-02 Camaro console to swap into my 69 Camaro. Getting it to fit in the car will be my easier part. I am looking to smooth out the hole for the parking brake handle and the cigarette lighter hole. I have used 2 part plastic epoxy before to fix a crack in my tail panel. Would this be a good choice for this?
I've seen people using fiberglass and bondo on them here as well would this be a better way to go?
After I've smoothed out those two holes 'd like to keep the textured look and give the console a nice black paint job. Any suggestions for paint that will do this, I've seen a kyrlon product for plastic that might work but I've never used it or seen results.
Thanks guys!
I've seen people using fiberglass and bondo on them here as well would this be a better way to go?
After I've smoothed out those two holes 'd like to keep the textured look and give the console a nice black paint job. Any suggestions for paint that will do this, I've seen a kyrlon product for plastic that might work but I've never used it or seen results.
Thanks guys!
#7
Launching!
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hadn't even thought of that! I think I may buy some ABS plastic If I need some additional I've seen you can heat it up and mold it. Going to delete the ash tray as well I am thinking. Should be a fun winter project.
Trending Topics
#9
TECH Enthusiast
iTrader: (4)
Join Date: Jan 2009
Location: Lawn Guyland
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I believe Kitty hair would be a better choice to close the large gaps like the cigarette lighter hole and such, then bondo over that.
+1 on textured Rustoleum for a pebble finish.
+1 on textured Rustoleum for a pebble finish.
#11
Launching!
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I may actually go with some ABS sheets and cut pieces to fit to fill areas. I have some ABS Cement I will try when bonding the pieces and then smooth it over of course.
I've read you can heat up the abs and shape it however you like as well anyone here tried that? I saw on another forum a guy made a custom console that way.
I've read you can heat up the abs and shape it however you like as well anyone here tried that? I saw on another forum a guy made a custom console that way.
#12
TECH Enthusiast
iTrader: (4)
Join Date: Jan 2009
Location: Lawn Guyland
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Kitty hair mixes up like body filler but is reinforced with fiberglass and bridges gaps fairly easy whereas body filler has a tendency to shrink and may crack and fall out. Never worked with ABS but I don't see a problem doing it that way?..
#14
TECH Veteran
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
^thanks for posting up the pics. that looks great. just gave me the confidence to test out some stuff with my interior, and fix the console in moms 78 Z28 im restoring. i actually just refinished ALL of the interior trimming, panels, console, etc a couple weeks ago. i redid everything from the interior, so it all looks brand new, although it didnt look that bad for being 31 years old. the only thing i had a little issue with was the console. it had a pretty deep burn from the cigerette lighter, so i had to fill it. that was easy, only problem is that there is now one smoothed area on a console that has a wrinkled texture, so the area stands out. but now im gonna go pickup a can of that VHT wrinkle paint and go over it again, hopefully then it'll all have a uniform look.
#17
TECH Fanatic
iTrader: (60)
Join Date: Dec 2006
Location: Reading, PA
Posts: 1,547
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have only found it at one Pepboys in my area. Lots of places carry Krylon textured paint but I have never seen it in black. The VHT was a bit hard to use on plastic as it did not want to wrinkle on some areas. I used a heat gun on some areas.
#19
TECH Enthusiast
iTrader: (1)
Join Date: Dec 2004
Location: San Jose
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
An expanding foam will be more then enough to fill in like the cup holder. Its light weight, easy to shape to what you want, and when its dry is gets pretty hard. Then put a layer of fiber glass over it and smooth it out then paint. I used it to fill a lot of stuff on my challenger project from the old dash to the door panels im working on now. I can post a couple of pictures later today. Another thing is that i really didnt like body filler to smooth the fiber glass, I used that fiberglass resin gel that mixes up like bondo and then sanded that out smooth.
#20
TECH Fanatic
iTrader: (60)
Join Date: Dec 2006
Location: Reading, PA
Posts: 1,547
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I would cut out the cup holder from the bottom and put painters tape over the top. Then fiberglass it from the bottom. The fiberglass will be stronger since it will adhere to the lip on the inside of the cup holder. You will also use less fiberglass/resin/filler, and use less bondo smoothing out the top once the painters tape is removed.