Dark Aqua Met T/A with suncoast ram air (LT1)
05-06-2011, 06:58 PM
#1
On The Tree
Thread Starter
Join Date: Jul 2010
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Dark Aqua Met T/A with suncoast ram air (LT1) First id like to say that the pictures ARE NOT the final end to the adjustments to fit the hood better. I put the hood on by myself and after making some initial adjustments decided to wait until I can get some help. I got the hood, bumper and head light door painted together everything matched perfectly to the rest of the car (thank god) Here are some pics of my car before and after the hood install.
Last edited by BL96TA; 05-06-2011 at 07:14 PM.
05-06-2011, 07:04 PM
#2
On The Tree
Thread Starter
Join Date: Jul 2010
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
the last pictures, it started raining so i couldn't clean it up and take some good shots of it. Other then some gap issues that i can fix the hood fits very well. Not OEM however well enough not to draw the wrong attention to it. Once i move the hood back a little and the driver head light in some there are only a few MINOR adjustments to get it to line up nearly perfect.
Trending Topics
05-07-2011, 08:19 AM
#8
On The Tree
Thread Starter
Join Date: Jul 2010
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
BTW your car looks SICK with that green! Very nice!
05-08-2011, 01:42 AM
#9
Launching!
Join Date: Apr 2011
Location: orbiting caprica
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
thx man. where did you get those covers? i looked around and on ebay but could not find any.
05-08-2011, 09:41 AM
#10
On The Tree
Thread Starter
Join Date: Jul 2010
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
http://www.hawksthirdgenparts.com/fi...smokepair.aspx
I got the tail light covers here. Then i took some 2000 grit sand paper and wet sanded the white logos off. After using a 3M rubbing compound they looked like they never came with any logos. They install by press fitting them, they will just snap into place with out any tape or velcro needed. To remove them it's just as easy. Even though they are dark the lights shine through very well.
I got the tail light covers here. Then i took some 2000 grit sand paper and wet sanded the white logos off. After using a 3M rubbing compound they looked like they never came with any logos. They install by press fitting them, they will just snap into place with out any tape or velcro needed. To remove them it's just as easy. Even though they are dark the lights shine through very well.
05-16-2011, 08:41 PM
#13
On The Tree
Thread Starter
Join Date: Jul 2010
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
agreed!Thanks for the compliments, i took a few more pics of the car the next day we had with good weather. here they are
Last edited by BL96TA; 05-16-2011 at 08:46 PM.
