Paint & Body Work Custom Painting | Panel Repairs & Replacement
Old 05-10-2016, 02:15 PM
How-Tos on this Topic
Last edit by: IB Advertising
See related guides and technical advice from our community experts:Browse all: Chevrolet Camaro or Pontiac Firebird Exterior Guides
Print Wikipost

Bubbling Sail Panel Issue for Dummies

Thread Tools
 
Search this Thread
 
Old 07-26-2010, 12:31 PM
  #1281  
Launching!
 
danbrazda's Avatar
 
Join Date: Mar 2009
Location: Chesterfield, VA
Posts: 203
Likes: 0
Received 0 Likes on 0 Posts
Default

Finally decided to pony up the dough and have mine replaced. Now I can't find a replacement roof panel anywhere. GM part # 10254708- ANYONE?
Old 07-26-2010, 12:36 PM
  #1282  
TECH Enthusiast
iTrader: (16)
 
loyolacub68's Avatar
 
Join Date: Jun 2005
Location: San Luis Obispo, CA
Posts: 732
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by crs5011
Any update? I called a local dealership and I missed their call back, but I want to try again. Are you the original owner? Just curious if I should push this a little more or accept defeat and let it be till I have $1000 laying around, which is highly unlikely.
There isn't a whole lot you can do other than try to get a dealer to fix it on a goodwill basis. You are outside 3yr/36k original warranty and the 6yr/100k corrosion protection warranty so GM doesn't have to do anything at this point. Save $100 every month and in 10 months you will be good to go.
Old 07-26-2010, 12:37 PM
  #1283  
TECH Enthusiast
iTrader: (16)
 
loyolacub68's Avatar
 
Join Date: Jun 2005
Location: San Luis Obispo, CA
Posts: 732
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by danbrazda
Finally decided to pony up the dough and have mine replaced. Now I can't find a replacement roof panel anywhere. GM part # 10254708- ANYONE?
I'm guessing you already tried gmpartsdirect? How about eBay? I heard a couple of guys got it from there.
Old 07-26-2010, 01:42 PM
  #1284  
TECH Enthusiast
iTrader: (13)
 
Giddswat's Avatar
 
Join Date: Jan 2006
Location: Parkton, Md.
Posts: 658
Likes: 0
Received 0 Likes on 0 Posts

Default

Here are the part numbers through www.gmpartsdirect.com

Roof Panel - 10254708
Applique - 10240165
Applique - 10240164

You only need the above three parts.
Old 07-26-2010, 01:45 PM
  #1285  
TECH Senior Member
iTrader: (42)
 
slt200mph's Avatar
 
Join Date: Jul 2003
Location: HOT'LANA, GAWJA
Posts: 7,067
Likes: 0
Received 8 Likes on 7 Posts

Default

There are a number of GM parts that are no longer available from GM. I was trying to find the ***** for the HVAC in a 2004 Corvette and they are no longer available from GM. A after maket company wanted $15 a piece for them... ... I hit the junk yard and got them both for $2 a piece. You will see more and more parts become unavailable from GM for the 4th gen F body cars. Find a good salvage yard and become friends with them.
Old 07-26-2010, 04:02 PM
  #1286  
Launching!
 
danbrazda's Avatar
 
Join Date: Mar 2009
Location: Chesterfield, VA
Posts: 203
Likes: 0
Received 0 Likes on 0 Posts
Default

Unavailable from GM Parts Direct. Nothing on eBay or Craigslist. Local dealer can't find one anywhere in the US. I'm going back to the "creative solutions" brainstorming. Maybe I'll visit some restoration places and see if they have any tricks up their sleeves. This blows.
Old 07-26-2010, 05:55 PM
  #1287  
TECH Senior Member
iTrader: (42)
 
slt200mph's Avatar
 
Join Date: Jul 2003
Location: HOT'LANA, GAWJA
Posts: 7,067
Likes: 0
Received 8 Likes on 7 Posts

Default

The junk yard/salvage yard is your friend. Just go and take one off of a 97 or older car and put it on your car...there is a thread on here telling and showing how to do it. If memory serves the guy paid $75 for the panel.
Old 07-27-2010, 05:46 AM
  #1288  
Launching!
 
danbrazda's Avatar
 
Join Date: Mar 2009
Location: Chesterfield, VA
Posts: 203
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by slt200mph
The junk yard/salvage yard is your friend. Just go and take one off of a 97 or older car and put it on your car...there is a thread on here telling and showing how to do it. If memory serves the guy paid $75 for the panel.
Yeah, I will search around and see what I come up with. Do you know of a better way to remove the top than piano wire? I've heard of very mixed results with this method.
Old 07-27-2010, 12:28 PM
  #1289  
Kleeborp the Moderator™
iTrader: (11)
 
MeentSS02's Avatar
 
Join Date: Mar 2004
Location: Dayton, OH
Posts: 10,316
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by danbrazda
Yeah, I will search around and see what I come up with. Do you know of a better way to remove the top than piano wire? I've heard of very mixed results with this method.
I would assume that anyone that can remove a windshield would be able to remove one of these panels - that's how mine was done (the body shop called a windshield replacement company).
Old 07-27-2010, 01:16 PM
  #1290  
TECH Enthusiast
iTrader: (4)
 
bj350hp's Avatar
 
Join Date: Jan 2003
Location: Gainesville FL
Posts: 589
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by danbrazda
Yeah, I will search around and see what I come up with. Do you know of a better way to remove the top than piano wire? I've heard of very mixed results with this method.

Originally Posted by MeentSS02
I would assume that anyone that can remove a windshield would be able to remove one of these panels - that's how mine was done (the body shop called a windshield replacement company).
or can use this kit from eastwood and do it yourself. http://www.eastwood.com/windshield-removal-kit.html.

Thats what I plan to use when I do my car.
Old 07-27-2010, 08:16 PM
  #1291  
Launching!
 
danbrazda's Avatar
 
Join Date: Mar 2009
Location: Chesterfield, VA
Posts: 203
Likes: 0
Received 0 Likes on 0 Posts
Default

Anyone think any of these products might actually provide adequate sealant for new paint on a '98-02 roof panel with the nuclear adhesive?

http://www.lord.com/Products-and-Sol...ml/21/5?page=3

Not trying to beat a dead horse here but I'm still holding out hope for my '01 bubbling bastard.
Old 07-28-2010, 08:34 AM
  #1292  
TECH Senior Member
iTrader: (42)
 
slt200mph's Avatar
 
Join Date: Jul 2003
Location: HOT'LANA, GAWJA
Posts: 7,067
Likes: 0
Received 8 Likes on 7 Posts

Default

You are beating a dead horse..nothing that you put on the panel with the bubbles is going to stop it...this is not a new event...it has been going on for years now...I tried to fix it three times and the bubbles always come back...I am going to a junk yard and getting a panel from a early 4th gen car and be done with it. You will save money and time by just replacing the panel...nuff said
Old 07-28-2010, 11:44 PM
  #1293  
LS1Tech Administrator
iTrader: (3)
 
RPM WS6's Avatar
 
Join Date: Nov 2001
Location: Schiller Park, IL Member: #317
Posts: 32,309
Likes: 0
Received 1,734 Likes on 1,244 Posts

Default

Originally Posted by slt200mph
Just go and take one off of a 97 or older car and put it on your car...
'98s built in 3/98 or earlier would be fine as well. So far I have not seen a single failure record for a '98 built in March or before.
Old 07-28-2010, 11:55 PM
  #1294  
LS1Tech Administrator
iTrader: (3)
 
RPM WS6's Avatar
 
Join Date: Nov 2001
Location: Schiller Park, IL Member: #317
Posts: 32,309
Likes: 0
Received 1,734 Likes on 1,244 Posts

Default

Originally Posted by danbrazda
Unavailable from GM Parts Direct. Nothing on eBay or Craigslist. Local dealer can't find one anywhere in the US.


The part number is still valid according to GMPD. It's listed as a special order part though, but it's not coming up as discontinued.

Might just be on back order. Did the dealer tell you that they can't even order one? I'd try another dealer, and/or send an e-mail to GMPD and see if they can still order one.
Old 07-29-2010, 05:45 AM
  #1295  
Launching!
 
danbrazda's Avatar
 
Join Date: Mar 2009
Location: Chesterfield, VA
Posts: 203
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by RPM WS6


The part number is still valid according to GMPD. It's listed as a special order part though, but it's not coming up as discontinued.

Might just be on back order. Did the dealer tell you that they can't even order one? I'd try another dealer, and/or send an e-mail to GMPD and see if they can still order one.
No, they say they can get one but there is not even a remote prediction as to when. All outlets they have access to have to do a "special order". I guess I'll just wait it out.
Old 08-05-2010, 03:15 PM
  #1296  
12 Second Club
iTrader: (6)
 
BAD2000TA's Avatar
 
Join Date: Apr 2004
Location: Friendswood
Posts: 1,326
Likes: 0
Received 1 Like on 1 Post

Default

My local dealer received a letter from GM stating mid-September for the part to come in. I guess I wait.....
Old 08-05-2010, 04:03 PM
  #1297  
Kleeborp the Moderator™
iTrader: (11)
 
MeentSS02's Avatar
 
Join Date: Mar 2004
Location: Dayton, OH
Posts: 10,316
Likes: 0
Received 2 Likes on 2 Posts

Default

Hopefully they continue to make them for a while...after all, I have a feeling that more and more people will be needing them
Old 08-05-2010, 04:48 PM
  #1298  
12 Second Club
iTrader: (6)
 
BAD2000TA's Avatar
 
Join Date: Apr 2004
Location: Friendswood
Posts: 1,326
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by MeentSS02
Hopefully they continue to make them for a while...after all, I have a feeling that more and more people will be needing them
You would think they would, right? I mean, the panel isn't exactly cheap! GM could be making some good coin by continuing to make them.
Old 08-11-2010, 12:14 PM
  #1299  
LS1Tech Administrator
iTrader: (3)
 
RPM WS6's Avatar
 
Join Date: Nov 2001
Location: Schiller Park, IL Member: #317
Posts: 32,309
Likes: 0
Received 1,734 Likes on 1,244 Posts

Default

I wish they were cheaper, I'd like to order a couple spares for possibile future cars I might own.
Old 08-15-2010, 09:24 AM
  #1300  
Teching In
 
MustangMuncher's Avatar
 
Join Date: Apr 2006
Location: West Chester, PA
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts

Default

Man..65 pages of info on this topic, and I just found this thread. Where have I been all my life? My '01 SS (that I still have at 88,000 miles, and bought new in 2001), has been bubbling for years, and I have been complaining to my dealer since WAY before 60,000 miles, and I was never told about the Service Bulletin, and was told basically, TOO EFFIN BAD FOR YOU !!!! Man,,,,GM CORPORATE is going to get one NASTY letter from me on my Attorney's Letterhead!!! Let's see what happens.


Quick Reply: Bubbling Sail Panel Issue for Dummies



All times are GMT -5. The time now is 06:33 AM.