F.A.S.T.,Two T-56's M6 & M10, JE 4.155" & Wiseco 4.0" pistons, Moser,....
#1
Thread Starter
Launching!
iTrader: (55)
Joined: Jan 2007
Posts: 271
Likes: 0
From: Valley Center, CA
F.A.S.T.,Two T-56's M6 & M10, JE 4.155" & Wiseco 4.0" pistons, Moser,....
I have two T-56 transmissions,
1. M10 Fully built 33 spline main, Has C5 ZO6 parts 1-4 gears. steel shift fork, carbon synchros, bronze pads, billet 1-4 keys, 2.88 first gear, case has been lightly polished. 500 miles on it only and it was in the stock SSR before being build. Only 500 SSR's have a trans like this one. Its like a viper m12. asking $2500 O. B. O. + shipping
2. M6 fully built minus viper main. All new syncros, keys, steel shift fork, and pads never ran since I had it rebuilt. $1700 + shipping. Pictures coming...
Two radiator supports, They are just alike, one chrome the other black.
1. Brand new chrome one $70 shipped
2. Flat black metal. $70 Shipped
Used Wiseco 4.00 bore by 4.0 stroke. +4cc dome. Ceramic coated, Brand new rings, comes with tool steel wrist pins, $300 Shipped.
Brand new JE custom pistons, PT# 573065, +2.3cc, 4.155 bore 4.0 stroke 6.125 rod, Were custom made for Nitrous or NA app. With a 70cc head they will be 12:1 cr. MSRP $1406, $700 Shipped O. B. O.
Stock Rods for LS1. $70 shipped
A pair of cats off of my dynatech headers $150 + shipping O. B. O.
LS1 TB, Ported and powder coated. $55 shipped
2002 Collector Edition Rims off of a WS6, Best Offer
Moser 12 bolt, 4.10's, True track, aluminum rear cover, upgraded 33 spline axles, welded BMR anti squat brackets and sway bar mounts, comes with 3.5" aluminum drive shaft from Thunder racing. Custom lenght for t-56 to 12 bolt, 1350 front and rear u joints. $2500 + shipping O. B. O.
1. M10 Fully built 33 spline main, Has C5 ZO6 parts 1-4 gears. steel shift fork, carbon synchros, bronze pads, billet 1-4 keys, 2.88 first gear, case has been lightly polished. 500 miles on it only and it was in the stock SSR before being build. Only 500 SSR's have a trans like this one. Its like a viper m12. asking $2500 O. B. O. + shipping
2. M6 fully built minus viper main. All new syncros, keys, steel shift fork, and pads never ran since I had it rebuilt. $1700 + shipping. Pictures coming...
Two radiator supports, They are just alike, one chrome the other black.
1. Brand new chrome one $70 shipped
2. Flat black metal. $70 Shipped
Used Wiseco 4.00 bore by 4.0 stroke. +4cc dome. Ceramic coated, Brand new rings, comes with tool steel wrist pins, $300 Shipped.
Brand new JE custom pistons, PT# 573065, +2.3cc, 4.155 bore 4.0 stroke 6.125 rod, Were custom made for Nitrous or NA app. With a 70cc head they will be 12:1 cr. MSRP $1406, $700 Shipped O. B. O.
Stock Rods for LS1. $70 shipped
A pair of cats off of my dynatech headers $150 + shipping O. B. O.
LS1 TB, Ported and powder coated. $55 shipped
2002 Collector Edition Rims off of a WS6, Best Offer
Moser 12 bolt, 4.10's, True track, aluminum rear cover, upgraded 33 spline axles, welded BMR anti squat brackets and sway bar mounts, comes with 3.5" aluminum drive shaft from Thunder racing. Custom lenght for t-56 to 12 bolt, 1350 front and rear u joints. $2500 + shipping O. B. O.
Last edited by haighter; 12-28-2009 at 09:44 PM.
#3
Thread Starter
Launching!
iTrader: (55)
Joined: Jan 2007
Posts: 271
Likes: 0
From: Valley Center, CA
The pistons are 4.155 bore, they were for a 434 thats a 4.0 stroke and i think they are about +2.3cc's. I can call je tomorrow and get all the stats.
Last edited by haighter; 12-22-2009 at 03:27 PM.
#6
Thread Starter
Launching!
iTrader: (55)
Joined: Jan 2007
Posts: 271
Likes: 0
From: Valley Center, CA
All pm's returned.
I'm also willing to do some trades. I'm looking for air to water intercooler, dirrect drive, 9" with 40 spline axles, 4303 magnafuel pump, ati red race bypass valve, heat exchanger for my intercooler, 90-105mm Tb, elbow for my super victor to Tb, mezier waterpum, rear afco or qa1's, vfn 4" or bigger ws6 style hood, rps tripple disk, mini tubs, wolfe front half of cage.
I'm also willing to do some trades. I'm looking for air to water intercooler, dirrect drive, 9" with 40 spline axles, 4303 magnafuel pump, ati red race bypass valve, heat exchanger for my intercooler, 90-105mm Tb, elbow for my super victor to Tb, mezier waterpum, rear afco or qa1's, vfn 4" or bigger ws6 style hood, rps tripple disk, mini tubs, wolfe front half of cage.
Trending Topics
#16
Thread Starter
Launching!
iTrader: (55)
Joined: Jan 2007
Posts: 271
Likes: 0
From: Valley Center, CA
All PM's returned
I shipped out the head gaskets, injectors, brakes, tracking numbers are 1ZE661W50358322979, 1ZE661W50324992470, 1ZE661W50324986816.