*** Alkycontrol meth kit FS ***
#1
*** Alkycontrol meth kit FS ***
Category: Engine - Intake/Fuel
Price: $100
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird, Front wheel drive vehicles
Location (State): CA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
SOLD (pics to come)
Also selling my black Fuelab boost referenced fuel pressure regulator. (pics to come).
SOLD
Please read my feedback. Will ship within 24hrs of purchase. PM me to buy. Thank you.
Last edited by ninetres; 03-04-2010 at 08:29 PM.
#6
Rated 25-90psi for EFI cars. Fuel pressure was rock solid on my 1000rwhp turbo car using only 1 inlet port.
It has DUAL -6 inlet ports, single -6 return
For another $10 I'll throw in a -6 to -8 male union (to run a -8 to your fuel rail) and -6 plug for the other inlet side if you don't opt to utilize it.
It has DUAL -6 inlet ports, single -6 return
For another $10 I'll throw in a -6 to -8 male union (to run a -8 to your fuel rail) and -6 plug for the other inlet side if you don't opt to utilize it.
Trending Topics
#8
Rated 25-90psi for EFI cars. Fuel pressure was rock solid on my 1000rwhp turbo car using only 1 inlet port.
It has DUAL -6 inlet ports, single -6 return
For another $10 I'll throw in a -6 to -8 male union (to run a -8 to your fuel rail) and -6 plug for the other inlet side if you don't opt to utilize it.
It has DUAL -6 inlet ports, single -6 return
For another $10 I'll throw in a -6 to -8 male union (to run a -8 to your fuel rail) and -6 plug for the other inlet side if you don't opt to utilize it.
#9
Here is a pic of how I had the regulator plumbed. I had a-8 feed running to the front of one rail. a -8 crossover on the back of the rails. And a -8 line running from the front of one rail to the regulator. The -6 drain come out of the bottom of the regulator and is kinda hidden in this pic:
As far as the meth kit pics........I just realized I might not have any of it installed on the car. I'll have to search a little bit. I am picking the kit up from the shop where my car is tomorrow. As mentioned, it is a custom kit designed to effectivly feed a 1000+ rwhp Camaro. It is set up for dual nozzles, but can be easily modified to use one nozzle in 1 minute, by simply removing the t-fittings, and additional hose.
As far as the meth kit pics........I just realized I might not have any of it installed on the car. I'll have to search a little bit. I am picking the kit up from the shop where my car is tomorrow. As mentioned, it is a custom kit designed to effectivly feed a 1000+ rwhp Camaro. It is set up for dual nozzles, but can be easily modified to use one nozzle in 1 minute, by simply removing the t-fittings, and additional hose.