9", 12bolt, TCI th400 & shifters

Reply Subscribe

Thread Tools

Search this Thread

01-17-2011, 05:57 PM

ddr698

On The Tree

Thread Starter

iTrader: (387)

Join Date: Mar 2004

Location: Gretna, NE

Posts: 158

Likes: 0

Received 0 Likes on 0 Posts

9", 12bolt, TCI th400 & shifters

Category: Racing Parts
Price: $750
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): NE
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

TCI TH400 trans part number 212000 . Fully compatible with LS1 cars (just pick up a ls specific converter or a standard converter with a crank spacer). This trans has 6k on it and is in excellent condition. It is a full manual reverse valve body transmissiob. Shifts firm and has never had a slip. Clean red fluid in it. Excellent. Was $1575 plus $100 pan upgrade, $89 tailshaft/speedo gear. Stall converter pictured in the trans is now sold. $1000 for the Trans only!

Here is a link to it on TCI's website:

http://www.compperformancegroupstore...ct_Code=212000

Trans is stamped with TCI part number and serial number you can verify with them...

Paypal or money order accepted. Currently sitting on a pallet banded and shrinkwrapped. Ready to ship ASAP.

Hurst Pro-matic 2; shifter, cable & base, used 1k - $100

Hurst RMVB quarter stick shifter & cable, used 8k - SOLD

TH400 built by Straightline Performance in KS to Rossler 2 Specs. Never been used since rebuild. Only difference is the valve body is a TCI performance one that is forward and not full manual. Includes 3200rpm Hughes converter that was used for around 10k but in good condition (http://www.summitracing.com/parts/HUP-GM25-400BP/ ). Receipt available. Asking $750 which is cheap enough to ad a full manual reverse valve body WITH trans brake and still be less than Rosslers Term II that doesnt have a brake! And you still have the converter to use or sell!

Moser 9" setup currently for 98-02 ls1 F-bodies. It has 4.10 gears which are fresh from being correctly set up by a GM mechanic that does 2-3 a week (everything was also inspected at the same time, axles, bearings, ring/pinion, etc). Axles are 31 spline Moser. Has a Auburn posi $305 option. 4 channel abs (98-02). Longer screw in style studs for the lugnuts. Nodular Iron center section and aluminum pinion support.
This was a $2600+ Rearend as shipped - $1850

383 LT1 Scat crank & rods, forged Probe -15cc pistons. Excellent condition. 2bolt block. Has 6500 miles on it. Had the normal cleaning, decking, new frost plugs, etc. Clevite bearings throughout. Internally balanced and blueprinted. Fully inspected and is in very good condition - $1750 plus ship

Moser 12 bolt for an LS1 car. It has optional 4 channel abs correct for the LS1. 3.73 Gears and a full spool. Upgraded Moser aluminum stud girdle. Came with coil-over and shock mounts but the coilovers mounts have been removed (aka still direct bolt in with stock components). Excellent condition. No whine or abnormal noise. Has approx 10k on it. Rear cover was removed and internals were inspected. $1850.