SteelmanLS1

iTrader: (1)

Category: Engine - Power Adders
Price: $2500
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): OK
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

$2500 Shipped - For guys looking to not modify anything and not wanting to modify any radiator setup etc for more of a "race type setup".

No trades please. There are things included in this KIT that are Not in the pictures below.

I take paypal + other forms of payment.

This kit is far superior to the 8-rib 1GJ204-SCI D1SC Kit Procharger sells for $6495 MSRP ($5999 is best deal I've seen it listed at anywhere) which doesn't have a FMIC, tensioner 8-rib setup or upgraded air inlet. This would work great on a low boost 8-10psi setup as well as a 18-20 psi race setup. Buy this and then buy your own procharger for a easy procharger install!

I was going to use this complete setup on my 00 WS6...

This is an ideal setup and far superior to a standard Procharger kit in every way with the upgrades. Whole setup was mocked up on a 00 SS camaro before I got it.

**No procharger included or blower pulley**

-New 8-rib Procharger Crank Pulley

-Brand New Complete Procharger Single Fan Assembly(Not shown in picture but can get one if needed)

-SDCE 8-Rib Billet Aluminum Crank Pulley Setup /w Adapter to use with your factory harmonic balancer (non ATI balancer) (Not shown in picture but can get one if needed)

-New Custom Air inlet pipe setup which gives no restriction like the factory Procharger air inlet.

-New $800 - Complete front mount intercooler setup with powdercoated black piping, 4" Core big Intercooler, Top quality Turbohoses Couplers, 90 deg reducer hose to throttle body ($300 alone from turbohoses, best stuff out). It has never had any type of air through it. Just mounted up for fitment.

-New Procharger Proflow Bypass valve /w custom screen cover

- 8-rib SDCE Tensioner Setup /w upgraded Steel J-bracket (this setup was $800 upgrade alone). Most SDCE setups, you send them your aluminum j-bracket and they modify it. This one uses a upgraded Steel J-bracket for no worry of bracket flex. You can run 18-20 psi with NO belt slip if you wanted.

- Radiator support bracket top plate - black - Replaces your air box so you don't have to leave old lower air box piece installed to hold radiator/condenser in place.

- Only thing that doesn't come with it is a belt! I would provide one but I haven't measured for it yet, you can just get one at any NAPA. (I recommend NAPA 8-rib belts).

This kit would be completely 100% new unused, but I have mocked up all the parts on the car and everything fit perfect. There are a few small marks on the piping just from handling and putting it all together, but all in all its all BRAND NEW, never seen any air through them.

383camaroz28

iTrader: (22)

so the d1 doesnt come with it?

SteelmanLS1

iTrader: (1)

No D1SC or blower pulley is included.

d1scamaro

what brand is the intercooler....and about how heavy is it?

SteelmanLS1

iTrader: (1)

I'm not really interested in separating this kit up. BUT I don't know what brand it is, I will look it over and get back to you. I do know it's A Lot heavier than I would of thought it should of been. I'll find out later this afternoon

lildut

iTrader: (1)

im interested, pm me

SteelmanLS1

iTrader: (1)

Bumping for the week.

TheZDeWolfe

too bad you wouldnt sell that D1 i would be all over this! LOL

Raptor_WS6

iTrader: (23)

so this is a full kit minus the HU?

Powered By V8

iTrader: (2)

interested if you are willing to part some of this stuff out...

SteelmanLS1

iTrader: (1)

Kit is still For-Sale! Sorry to whoever PMed me about this kit. I had some family emergencies and Had to skip town for a few weeks...

Will Not Separate

Thanks everyone.

SteelmanLS1

iTrader: (1)

HU / Belt

sciff5

iTrader: (1)

How much is the blower pulley?

Just to get a real sense for how much it would take to get up and running I'd still need injectors, crank pinning kit, prob a fuel pump obviously the head unit and blower pulley, 3 bar map sensor.

I am sure I am missing some stuff.

SteelmanLS1

iTrader: (1)

Not much.

GR8GAME

iTrader: (10)

Hey Shane, I received the boxes but I'm missing a few items from what's pictured. One is the custom air inlet pipe you advertised. I also got damaged pulleys on the J bracket(possibly from shipping). And one of the pulleys is a 6 rib? Not sure why since it's an 8 rib setup.

I sent you a text, I'll wait for your reply.

Thanks,

Matt

SteelmanLS1

iTrader: (1)

Hey Matt,

Send me some pictures through texts of the things missing.

topfig1

iTrader: (5)

How can he take pictures of something thats not there? Just saying...

LT1TA

iTrader: (17)

lmao...

GR8GAME

iTrader: (10)

Lol thanks guys, I was able to talk with him. He's looking into it.