LT1 ETP heads, BRE turbo cam, supporting valvetrain components
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Sep 2005
Location: Ohio
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
LT1 ETP heads, BRE turbo cam, supporting valvetrain components
Category: Engine - Intake/Fuel
Price: $2500
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette
Location (State): OH
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LT1/LT4
LS Engine?: Non-LS Part
The heads are ET performance CNC ported LT1 casting, they flow 285 CFM at .750 lift on the intake side and 206 CFM at .750 lift on the exhaust side, port volume is 207cc on the intake. The heads have 58cc combustion chambers and use rev-hard racing valves (2.02 intake and 1.60 exhaust). The heads are equipped with PAC racing beehive springs they’re comparable to 26918 Comp Cams but Bret Bauer suggested the PAC brand and Comp Cam titanium locks and retainers. The heads have 7/16th ARP rocker studs and have Comp Cam Pro Magnum Rockers on them.
The cam is a roller and designed for these heads and was made with the intention of making 1000wrhp with a turbo 355; obviously it can also be used with other turbo builds. Cam was purchased through Bret Bauer of Bauer Racing Engines; specs are 22x 23x, cam card will be provided to buyer.
I also have new PBM roller lifters; Cloyes billet true double roller timing chain (9-3545x9 PN), and Canton LT1 aluminum valve covers.
I will sell everything together for 2500, after a week I will begin to separate with the following prices everything is plus shipping. I have the original boxes for everything but the lifters. Contact Corey Luman at crluman@gmail.com.
•Heads with hardware(minus rockers) 1200 obo
•Rockers SOLD
•Cam 275
•Lifters 350 (lifters will work ls1 and other sbc)
•Timing set 60
•Valve Covers SOLD
Last edited by gemballa996t; 05-06-2011 at 09:20 AM.