370 motor & 799tsp heads (part out)
01-14-2012, 01:03 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Location: mobile al
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
370 motor & 799tsp heads (part out) Category: Accessories
Price: $1
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): AL
Item Condition: Used
LS Engine?: Fits LS Engine
block is no good has a crack at top of cylinder --- and its 10-7 cpmpresson with 64cc head
note this motor has bout 100 miles on set up
like to sale the Rotating Assembly to gather cent its all balance
stock crank- polish
scat h beam rods 6.125 apr2000 bolts
srp flat top pistons part# 279591
je file fit rings
1000 obo + shipping all the main and rod bearing will come with it they also only have 100 miles on them
ls7 lifters 100 miles $75
tsp cam 229/236/625-615 111 lsa $200 sold sold
heads 64cc
799 tsp ls6 2.5 heads pressure tested & surfaced
prc 675 springs $800 or best offer
harland shap 1.6 rockers &250
comp 7,4 push rods $ 50
note all parts have 100 miles or less price + shipping on all parts + paypal fees
pm for any ? thanks and motor is still in car can hear run if near by i will be pulling it next week end or if some one wonts to buy complete will have some one pull it at time of sale
Last edited by Andy fortner; 01-24-2012 at 01:57 PM.
01-14-2012, 04:54 PM
#2
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Location: mobile al
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
all so will sale as a running motor u would have to get block checked it will come with every thing in post and will have arp main stud arp head studs tsp ls6 oil pump
ls3 timing chain dubble roller font cover has the timming sensor all i wont to keep is my accessories oil pan valve cover and buy will get all the paper work i have from machin shop if but the long block it will look just as in pic thanks
ls3 timing chain dubble roller font cover has the timming sensor all i wont to keep is my accessories oil pan valve cover and buy will get all the paper work i have from machin shop if but the long block it will look just as in pic thanks
01-14-2012, 08:40 PM
#5
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Location: mobile al
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Lift
Intake Flow
Exhaust Flow
.200"
147 cfm
114 cfm
.300"
209 cfm
152 cfm
.400"
258 cfm
191 cfm
.500"
294 cfm
207 cfm
.600"
316 cfm
226 cfm
maybe this will work
Intake Flow
Exhaust Flow
.200"
147 cfm
114 cfm
.300"
209 cfm
152 cfm
.400"
258 cfm
191 cfm
.500"
294 cfm
207 cfm
.600"
316 cfm
226 cfm
maybe this will work
