Question about 3 Bar Map sensor for ls6 intake
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2010
Location: los angeles,CA
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Question about 3 Bar Map sensor for ls6 intake
looking To see if there is a 3 bar Map sensor that will directly bolt on to the ls6 intake.
Ive seen a couple threads were people are taping the intake with a fitting and running a piece of hose I’m just not trying to go that route unless I completely have to, I’d rather have plug and play.
any input would be helpful I’ve done a few searches but everything i see is from old threads.
Ive seen a couple threads were people are taping the intake with a fitting and running a piece of hose I’m just not trying to go that route unless I completely have to, I’d rather have plug and play.
any input would be helpful I’ve done a few searches but everything i see is from old threads.
#2
I found this one and was just getting ready to post here to see if anyone has used it and if it's any good. DSteck isn't making his 2.5 map sensors anymore and I need a sensor.
https://www.efisource.com/wp/shop/ls...ar-map-sensor/
https://www.efisource.com/wp/shop/ls...ar-map-sensor/
#3
"I MAID THEESE"
iTrader: (3)
I found this one and was just getting ready to post here to see if anyone has used it and if it's any good. DSteck isn't making his 2.5 map sensors anymore and I need a sensor.
https://www.efisource.com/wp/shop/ls...ar-map-sensor/
https://www.efisource.com/wp/shop/ls...ar-map-sensor/
#7
Staging Lane
iTrader: (3)
Join Date: May 2011
Location: VA
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
I recently converted to a 3 bar OS. ACDelco 3bar MAP Sensor part number 12615136 is the one I use. Works great and personally would not use anything other than ACDelco for sensors. Had to use a file on the map sensor to fit. Doesn’t effect anything. The good thing about that is you don’t have to mess with your intake. And if you use HP tuners it will update all settings properly for this map sensor.
Trending Topics
#8
3 bar map
I have the efi source 3 bar map sensor for the ls6 intake its new. I decided I was going to switch to the other style u dont like I'll charge u 35 shipped to your door
shoot me a pm
shoot me a pm
#10
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2010
Location: los angeles,CA
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
I recently converted to a 3 bar OS. ACDelco 3bar MAP Sensor part number 12615136 is the one I use. Works great and personally would not use anything other than ACDelco for sensors. Had to use a file on the map sensor to fit. Doesn’t effect anything. The good thing about that is you don’t have to mess with your intake. And if you use HP tuners it will update all settings properly for this map sensor.
#11
Originally Posted by 02z28marom6
I recently converted to a 3 bar OS. ACDelco 3bar MAP Sensor part number 12615136 is the one I use. Works great and personally would not use anything other than ACDelco for sensors. Had to use a file on the map sensor to fit. Doesn’t effect anything. The good thing about that is you don’t have to mess with your intake. And if you use HP tuners it will update all settings properly for this map sensor.