2001: A CoreyD TA
#421
TECH Regular
iTrader: (3)
It was a good opportunity hahah he was asking g 16k was recently painted, built 383 5 speed, red interior but it needed redone.
I still wanna finish my 71 Camaro, but everytime I see one especially the early second gens..... I think about trading.
I jist finished welding some bracing all up to do the roof swap. Once I start making real progress I'll probably be more content
Safety loop big need!!! my GTO shaft let loose on the interstate scared the hell outa me!
I still wanna finish my 71 Camaro, but everytime I see one especially the early second gens..... I think about trading.
I jist finished welding some bracing all up to do the roof swap. Once I start making real progress I'll probably be more content
Safety loop big need!!! my GTO shaft let loose on the interstate scared the hell outa me!
The following users liked this post:
CoreyD (10-18-2022)
#423
TECH Resident
Thread Starter
iTrader: (9)
Picked these up tonight! Forgestar F14 17x10+44 wrapped in 275-40-17 ET Street SS
Tires could be a little meatier in my opinion but they fit great so I'm happy. I love the color of these
Hitting the track this Sunday, will report back with times.
Also got my exhaust done! Overall I'd say it is a lot deeper, the "trumpeting" sound I'd get around 2100 is all but gone, and thankfully the shop fixed all the leaks from my Speed Engineering Y-pipe and their clamps. SOTP feeling is better too! Here's a vid
Tires could be a little meatier in my opinion but they fit great so I'm happy. I love the color of these
Hitting the track this Sunday, will report back with times.
Also got my exhaust done! Overall I'd say it is a lot deeper, the "trumpeting" sound I'd get around 2100 is all but gone, and thankfully the shop fixed all the leaks from my Speed Engineering Y-pipe and their clamps. SOTP feeling is better too! Here's a vid
The following 3 users liked this post by CoreyD:
#428
TECH Resident
Thread Starter
iTrader: (9)
Long day on Sunday! Did not get a chance to run bc we went on a rescue mission to get my buddy a spare driveshaft after shredding this one on the first pass of the day.
Ended up making it back to the track right before it closed and was able to get his TA back in action. Car did good as a highway cruiser lol. Got me thinking I should ditch the stock DS
Ended up making it back to the track right before it closed and was able to get his TA back in action. Car did good as a highway cruiser lol. Got me thinking I should ditch the stock DS
The following 3 users liked this post by CoreyD:
The following 5 users liked this post by CoreyD:
AllRev (11-03-2022), blackbyrd (11-03-2022), Cajun ELESS-ONE (11-05-2022), LaBLKv6Z (11-04-2022), ramairjohn2000 (11-03-2022)
#430
TECH Resident
Thread Starter
iTrader: (9)
Little paint work going on today. I have been wanting to paint my mirrors for a while and had the supplies for this for a couple months or so and got around to tackling it today.
Very happy how it turned out being a DIY aerosol job. Clear is still curing so I'll be wet sanding once that is done.
Figured if I messed up they would probably look better than they did before anyway lol
My 3D printed mirror brackets still going strong!
The products
Did 4 coats of primer, 4 base coats, and 4 coats of clear.
Very happy how it turned out being a DIY aerosol job. Clear is still curing so I'll be wet sanding once that is done.
Figured if I messed up they would probably look better than they did before anyway lol
My 3D printed mirror brackets still going strong!
The products
Did 4 coats of primer, 4 base coats, and 4 coats of clear.
The following 2 users liked this post by CoreyD:
ramairjohn2000 (01-04-2023), WS6 #3392 (11-12-2022)
#431
TECH Fanatic
iTrader: (8)
They came out looking great
Little paint work going on today. I have been wanting to paint my mirrors for a while and had the supplies for this for a couple months or so and got around to tackling it today.
Very happy how it turned out being a DIY aerosol job. Clear is still curing so I'll be wet sanding once that is done.
Figured if I messed up they would probably look better than they did before anyway lol
My 3D printed mirror brackets still going strong!
The products
Did 4 coats of primer, 4 base coats, and 4 coats of clear.
Very happy how it turned out being a DIY aerosol job. Clear is still curing so I'll be wet sanding once that is done.
Figured if I messed up they would probably look better than they did before anyway lol
My 3D printed mirror brackets still going strong!
The products
Did 4 coats of primer, 4 base coats, and 4 coats of clear.
The following users liked this post:
CoreyD (11-12-2022)
The following 3 users liked this post by CoreyD:
The following users liked this post:
CoreyD (11-14-2022)
The following 2 users liked this post by CoreyD:
ramairjohn2000 (11-28-2022), WS6 #3392 (11-27-2022)
The following users liked this post:
CoreyD (11-28-2022)
The following users liked this post:
CoreyD (12-11-2022)
The following 2 users liked this post by CoreyD:
ramairjohn2000 (01-04-2023), WS6 #3392 (01-04-2023)
#439
TECH Resident
Thread Starter
iTrader: (9)
Newly acquired 3D scanner and laptop! Gonna be a big help with designing parts and hopefully open up a lot of doors with this
Last edited by CoreyD; 01-06-2023 at 11:32 AM.
The following users liked this post:
ramairjohn2000 (01-06-2023)