Mustang notch LS build
01-12-2017, 03:25 AM
#41
ok my 92mm tb came in ,mounted it up, i also put the alt. on...test fit my 2" steel cowl hood..it hit...not as bad as i thought..i massaged an inner brace about 1/2" it sits flat...but i bought a new alt. for it and that did not clear...so i compared it to the old alt....the original alt. has a smaller body casting than the new one...i put old one on and it clears!! heres a few pics
01-12-2017, 03:30 AM
#42
I'm using the factory truck throttle cable I had to modify to get to work. I got some fittings that let you adjust its lenght I really need to get a nice lokar cable. Check out the build txfireman1972 is doing on his notch build thread on here he did it right with the lokar cable. As for the serpentine belt, I'm running manual power steering so I deleted the power steering pump had to search in Google and found the length. If you really need it I'll get it for you.
01-27-2017, 08:27 PM
#45
Last edited by TxFireman1972; 02-02-2017 at 04:23 PM.
02-12-2017, 06:53 PM
#47
Finally made it to the track. Really pleased with the outcome. The car ran great no issues at all and made 8 passes yesterday. Best all motor was 11.9@ 120mph. My last pass I sprayed but my bottle only had around 3 pounds left over from the dyno session. I really only felt it in first gear and then power went away.
Here's the pass I did on nitrous.
Last edited by Lsxnafox; 02-12-2017 at 07:12 PM.
02-12-2017, 07:02 PM
#48
I'm running 3.73 rear end with a 28in tall tire that seems to be a good combo as I was crossing the line at just about the top of 3rd.
You won't be dissapointed going to starkweather. Nathan really knows his stuff he was at the track yesterday and took the time to help me out. He noticed I was leaving off the line like **** so he put some more timing down low.
