Demon SS

iTrader: (3)

Here is the deal this time around. this sale will end Friday january the 6th.

408ci iron block
6.0L block
Eagle Forged LS1 Crank 4" Stroke
Callies LS1 Rods
Diamond Pistons(either -2cc or -15cc)
Diamond Pro-Select Rings
Federal Mogul Main Bearings
Federal Mogul Rod Bearings
Clevite Cam Bearings
ARP Main Studs

Short block fully balanced, blueprinted and assembled

Price $3499.99 no core or core charge (shipping not included)

We can do a full 408ci Long Block for $5749.99(shipping not included)
includes everything above plus
Custom Cam(Comp Cams)
LS6 Ported oil pump
Rollmaster Double Adj timing chain
Comp Cams Lifters(850-16's)
Stage 3 Heads(6.0L)
GM MLS Head Gaskets and Head bolts
New Oil Galley Plug
New Lifter Trays
Assembled

370ci Iron Short Block
6.0L block
Stock Crank Polished and Magna-Fluxed
Callies LS1 Rods
Diamond Pistons(either -2cc or -15cc)
Diamond Pro-Select Rings
Federal Mogul Main Bearings
Federal Mogul Rod Bearings
Clevite Cam Bearings
ARP Main Studs

Short block fully balanced, blueprinted and assembled

Price $2999.99 no core needed or required(shipping not included)

We can do a full 370ci Long Block for $5249.99(shipping not included)
includes everything above plus
Custom Cam(Comp Cams)
LS6 Ported oil pump
Rollmaster Double Adj timing chain
Comp Cams Lifters(850-16's)
Stage 3 Heads(5.7L or 6.0L)
GM MLS Head Gaskets and Head bolts
New Oil Galley Plug
New Lifter Trays
Assembled

or a Forged 347
New LS6 5.7L Alum. Block
Stock Crank Polished and Magnafluxed
Callies LS1 Rods
Diamond Pistons
Diamond Pro-Select Rings
Federal Mogul Main Bearings
Federal Mogul Rod Bearings
Clevite Cam Bearings
ARP Main Studs
Short block fully balanced, blueprinted and assembled

Price $2799.99 no core or core charge

Full 347 Long Block for $4979.99
includes everything above plus
Custom Cam
LS6 Ported oil pump
Rollmaster Double Adj timing chain
Comp Cams Lifters(850-16's)
Stage 2 Heads
Assembled

If you have any other questions about options pm or email us and we will respond asap.

Thanks
Brad

tbojbob

Bravo! What a way to start the New Year! This is forcing me to get my butt in gear and do my taxes ASAP!

Demon SS

iTrader: (3)

Well quit wasting time on the computer and get to it.

Scalpel

iTrader: (4)

Scott, who does the machine work, etc down there in your part of Ky/In?

BLWN1

iTrader: (6)

Do you do it in house or a local?

Demon SS

iTrader: (3)

Sorry both Brad and I have been out of town. Some machine work is done in house and some is out sourced. For our out sourced work we use either Speed Machine or Bell Motors. Both places have Sunnen equipment.
We do ALL of the final assembley and inspections.

92SilverSHO

iTrader: (3)

just curious, how much does your avg 408 make to the wheels?

Demon SS

iTrader: (3)

with the right heads and cam we have seen well over 500rwhp
https://ls1tech.com/forums/dynamometer-results-comparisons/415268-ffhp-408-dino-numbers.html

one guy made 440rwhp in an auto, ran 11.4 at 126 first time out
https://ls1tech.com/forums/showthrea...9&page=1&pp=10
post #61

again final results will depend a lot on the heads, cam and exhaust

KAOS

iTrader: (5)

any ls2 deals? stock crank and cubes?

Demon SS

iTrader: (3)

we can do an LS2 setup but since we don't have a good hookup on LS2 blocks it is hard (almost impossible) for us to be price competitive on the LS2 setups. I'll work you up a quote this afternoon and shoot you a pm.

WS666

iTrader: (14)

Brad- You have a PM.

Demon SS

iTrader: (3)

sorry about that i read it and forgot to respond. we are basically ready but we are waiting on the et heads. once we have those we will be ready to rock and roll.