Roger Z06 vs Mach 1
#1
Thread Starter
On The Tree
iTrader: (4)
Joined: Mar 2009
Posts: 109
Likes: 0
From: South Mississippi
Roger Z06 vs Mach 1
I just got my "new" Z06 (2002) and my friend wanted to see if I wanted to try it against his Mach 1 His car is a full exhaust(LT's, Xpipe, Cat-back), ported manifold, 98 Cobra Cams, JLT CAI, 456 Gears, Drag Shock, Full race Suspension, and a Detroit locker with 31 spline axles. We ran from a 60 roll and I put about 8-10 cars on him. Then we went from a dig and he immediately jumped out on me about 3 cars but by the time I got to 90mph I had come around him and then put 3-4 cars on him by 115. I am going to get my camera charged up for this weekend, i am supposed to be running a 900hp@34psi supra, but he is only going to use "23psi" on me
#4
Is your Z06 stock? You should not have come around that Mach 1 from a dig. That means if you two were at the track he would have you beat past the 1/8th mile and then you would run past him and finish the 1/4th mile 3-4 carlengths ahead of him. Doesn't make sense unless your car has quite a bit of mods.
#5
Is your Z06 stock? You should not have come around that Mach 1 from a dig. That means if you two were at the track he would have you beat past the 1/8th mile and then you would run past him and finish the 1/4th mile 3-4 carlengths ahead of him. Doesn't make sense unless your car has quite a bit of mods.
#6
He should easily come around a mach one from a dig. He may be a little off on the carlengths though. My car runs like a Z06 and tonight I'm going to come around a mach one with a hell of a driver after giving two car lengths. I tried it once after giving 2 lengths and hit. I didn't catch him until the 1/4 though. The only reason I didn't win is I slept too long after giving him the hit; then, I overreacted and wasted 1st.
Longtubes
O/R X
Catback
Ported intake
96-98 Cobra intake cams
JLT CAI
4.56 gears
Drag shocks
"Full race suspension"
31 spline axles
(assuming he is running a hell of a tire)
Anyways, what are your mods? I'm assuming you have a T/A? If you say he should easily come around a Mach 1 like that from a dig in his Z06 (I'm assuming it is stock) then you are ignorant as hell.
Trending Topics
#8
i was at a light and a c6 zo6 wanted some action he asked me if i had a blower and i said no.he didnt ask if i had a nice fresh full bottle in the trunk,he says this is going to be ugly i said go on green after we ran a few times he couldnt understand how he was getting spanked he just had a dumb look on his face nodded his head an then turned off .good kill by the wat but the outcome does not sound rite on the car lenghts
#9
Ok who didn't give noride the memo!!!???..........Huh? Who didn't give it to him??
Noride, sorry no one let you know but Ford motors aren't fast unless they have a turbo or supercharger. This has been covered and preached thousands of times by GM owners. This memo was sent out shortly after the "God's hands touched the LS1" memo.
Noride, sorry no one let you know but Ford motors aren't fast unless they have a turbo or supercharger. This has been covered and preached thousands of times by GM owners. This memo was sent out shortly after the "God's hands touched the LS1" memo.
#10
I just got my "new" Z06 (2002) and my friend wanted to see if I wanted to try it against his Mach 1 His car is a full exhaust(LT's, Xpipe, Cat-back), ported manifold, 98 Cobra Cams, JLT CAI, 456 Gears, Drag Shock, Full race Suspension, and a Detroit locker with 31 spline axles. We ran from a 60 roll and I put about 8-10 cars on him. Then we went from a dig and he immediately jumped out on me about 3 cars but by the time I got to 90mph I had come around him and then put 3-4 cars on him by 115. I am going to get my camera charged up for this weekend, i am supposed to be running a 900hp@34psi supra, but he is only going to use "23psi" on me
#12
You also probably aren't running a Mach 1 with
Longtubes
O/R X
Catback
Ported intake
96-98 Cobra intake cams
JLT CAI
4.56 gears
Drag shocks
"Full race suspension"
31 spline axles
(assuming he is running a hell of a tire)
Anyways, what are your mods? I'm assuming you have a T/A? If you say he should easily come around a Mach 1 like that from a dig in his Z06 (I'm assuming it is stock) then you are ignorant as hell.
Longtubes
O/R X
Catback
Ported intake
96-98 Cobra intake cams
JLT CAI
4.56 gears
Drag shocks
"Full race suspension"
31 spline axles
(assuming he is running a hell of a tire)
Anyways, what are your mods? I'm assuming you have a T/A? If you say he should easily come around a Mach 1 like that from a dig in his Z06 (I'm assuming it is stock) then you are ignorant as hell.
#14
One of the most feared internet gangsters around.
#15
In all honesty with a "drag suspension," 4.56s, those cams, and a good tire there's no reason that Mach 1 wouldn't be a low-mid 12s car. Maybe better depending on a few other things and conditions. So it should be almost a dead heat in the 1/4. Wouldn't have too much for you from a roll, obviously.
#16
In all honesty with a "drag suspension," 4.56s, those cams, and a good tire there's no reason that Mach 1 wouldn't be a low-mid 12s car. Maybe better depending on a few other things and conditions. So it should be almost a dead heat in the 1/4. Wouldn't have too much for you from a roll, obviously.
#17
All of the things on that list mean a 320 hp car with gears that make him have to shift frequently. It's a long list, when it could have just said POS. I stand by the fact that he will and did come around him. Most people would say the lengths are off. Lastly, check your tone..... or are you one those internet gangsters.
#18
#19
ok who didn't give noride the memo!!!???..........huh? Who didn't give it to him??
noride, sorry no one let you know but ford motors aren't fast unless they have a turbo or supercharger. This has been covered and preached thousands of times by gm owners. This memo was sent out shortly after the "god's hands touched the ls1" memo.
noride, sorry no one let you know but ford motors aren't fast unless they have a turbo or supercharger. This has been covered and preached thousands of times by gm owners. This memo was sent out shortly after the "god's hands touched the ls1" memo.