Pullied cobra vs cam only t/a
#161
TECH Regular
iTrader: (6)
Join Date: Sep 2007
Location: Germantown, MD
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
I would think w/ the mods listed in your sig you'd be running 10's easily. What's the elevation at the tracks you race at? The ones here in MD range from less than 100ft to around 500ft so we get good air especially when it's cool out.
#162
TECH Apprentice
iTrader: (3)
Join Date: Jan 2006
Location: Ohio
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
have no idea man. its central ohio...... I am sure I could run 10s. if I put gears, slicks and skinnies and drove it like I stole it. doubt the 10 bolt would hold it though. I am a m6 and its not as easy as your auto. so it would take practice. thats my point and my argument. they think its common and easy to run those times. maybe for an a4, not for a m6 and not with a 10bolt with stock gears......possible yes, easy no.
#163
TECH Regular
iTrader: (6)
Join Date: Sep 2007
Location: Germantown, MD
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
have no idea man. its central ohio...... I am sure I could run 10s. if I put gears, slicks and skinnies and drove it like I stole it. doubt the 10 bolt would hold it though. I am a m6 and its not as easy as your auto. so it would take practice. thats my point and my argument. they think its common and easy to run those times. maybe for an a4, not for a m6 and not with a 10bolt with stock gears......possible yes, easy no.
#164
TECH Regular
iTrader: (6)
Join Date: Sep 2007
Location: Germantown, MD
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
This is a site I use btw to get an idea of the DA at the track....I looked up Ohio for you.
http://dragtracker.com/tracks/tracks.php?state=OH
http://dragtracker.com/tracks/tracks.php?state=OH
#166
Ls6.. It is a basic setup but it a well put together setup. She runs decent.
My old white TA cam only (stock ls1 intake) ran 7.5s@92mph in 2400DA (was like 90 degrees that night).
Put intake/heads (no tune) on it and it ran 7.2s@96mph spinning its *** off (stock suspension) and hitting rev limiter (because of no tune). Same weather as last time.
My current setup only makes 370Rwhp but runs 7.2s@ 93mph full weight.. It still has a LOT left in it.. (intake/heads/was on nitrous tune hose runs)..
Power means nothing, it is the way you make it/etc etc etc..
BTW to answer your question , I am currently changing over to a FAST setup.. I'm shooting for 7.0Xs @ 95mph or so.. After I do heads I'm shooting for 6.8s @ 98mph or so. Hopefully I will still be able to shave another 2/10ths off of it and MAYBE 2mph just changing some odd and ends with it not sure on that though. We will see....
My old white TA cam only (stock ls1 intake) ran 7.5s@92mph in 2400DA (was like 90 degrees that night).
Put intake/heads (no tune) on it and it ran 7.2s@96mph spinning its *** off (stock suspension) and hitting rev limiter (because of no tune). Same weather as last time.
My current setup only makes 370Rwhp but runs 7.2s@ 93mph full weight.. It still has a LOT left in it.. (intake/heads/was on nitrous tune hose runs)..
Power means nothing, it is the way you make it/etc etc etc..
BTW to answer your question , I am currently changing over to a FAST setup.. I'm shooting for 7.0Xs @ 95mph or so.. After I do heads I'm shooting for 6.8s @ 98mph or so. Hopefully I will still be able to shave another 2/10ths off of it and MAYBE 2mph just changing some odd and ends with it not sure on that though. We will see....
#168
#170
TECH Regular
iTrader: (6)
Join Date: Sep 2007
Location: Germantown, MD
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
I think every place is better than California to have a nice setup....they make it tough on the enthusiasts it seems! On my 11.8 I was at 114-115mph and my 11.4 was at 119mph. Gotta love negative DA!
#172
TECH Fanatic
iTrader: (7)
Cobra guys will like this!
Cam, gears, Fast intake, LT's. 443rwhp 405rwtq
http://www.youtube.com/user/deanh8#p/u/24/_7g_ARUDVSs
http://www.youtube.com/user/deanh8#p/u/24/_7g_ARUDVSs
#174
10 Second Club
iTrader: (1)
Join Date: May 2006
Location: Jonesboro, LA
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
so, it was so easy you had to do a 12 bolt, susp and gears I am assuming? everyone is missing the point. These guys are talking like its just so easy to run those times. my point is its NOT easy and the majority of cam only cars aren't in the 11's. I know with a GOOD setup it is done.
I also assume you have an A4?
I also assume you have an A4?
Its not as hard as you are making it out to be. It doesn't take gears, slicks, skinnies, and full suspension to do it.
#175
Cam, gears, Fast intake, LT's. 443rwhp 405rwtq
http://www.youtube.com/user/deanh8#p/u/24/_7g_ARUDVSs
http://www.youtube.com/user/deanh8#p/u/24/_7g_ARUDVSs
NavyblueSS- Thats are point you went 11.64 at 116. Once again we are talking from a roll.
#176
#177
TECH Apprentice
iTrader: (3)
Join Date: Jan 2006
Location: Ohio
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Actually it is easy. My car went 10.92 @ 126 on the stock 10bolt with 3.23 gears and 17in BFG drag radials. This was on a 100 shot. Rest of the mods were TSP 228R cam, bolt ons, and a Yank 3600 stall. Full weight 3650lb. car. Best on motor cam only was 11.64 @ 116.
Its not as hard as you are making it out to be. It doesn't take gears, slicks, skinnies, and full suspension to do it.
Its not as hard as you are making it out to be. It doesn't take gears, slicks, skinnies, and full suspension to do it.
BTW - these are all a4 cars with stalls......
Not real sure why were are debating this. I know what my car is capable of. will I prove it, no. I don't want to go to the track. this thread was about a roll race. we were just pointing out that cory has beat (badly), several cam only and a couple h/c cars with his pullied cobra......
Last edited by 00silverGTP; 04-30-2010 at 10:30 AM.
#178
Teching In
iTrader: (2)
Join Date: May 2007
Location: Socal
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
I havent ran my car here in cali because I live in hollywood and as far as i know there isnt a drag strip within 2 hours of me. But my old car was a 2k A4 WS6 with a Lid, LS6 intake, Catback, Cutout, Longtubes, Tune, Stock Stall, Stock Gears and street tires it went 12.6@111 and 12.4@112 on Nitto DR's
#179
TECH Fanatic
iTrader: (7)
Yeah, but when they raced (LONG TIME AGO) the SS only had gears with a LS6 cam. With the LS6 cam he was running 12.3 @ 113mph. From what I know they haven't raced since then. When he ran those times and ran the Cobra he didn't even have longtubes either. I believe his SS is full weight too
#180
Yeah, but when they raced (LONG TIME AGO) the SS only had gears with a LS6 cam. With the LS6 cam he was running 12.3 @ 113mph. From what I know they haven't raced since then. When he ran those times and ran the Cobra he didn't even have longtubes either. I believe his SS is full weight too
Niterider- Decent times.....my brother trapped 112 with just bolt ons also.