C6Z vs. 500hp Turbo S2k (vid)
#1
Teching In
Thread Starter
Join Date: Aug 2006
Location: hawaii
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
C6Z vs. 500hp Turbo S2k (vid)
On saturday I got a pass to go play, so I met up with some guys and the turbo S2000 wanted to play. I saw a vid with him vs another C6Z and his mods were exhaust intake and a tune. It looked like a pretty good race so I said why not..
here is the vid of him vs the other C6Z
http://www.youtube.com/watch?v=h4-jbwdXK90
In my vid, there was some traffic.
http://www.youtube.com/user/RSKYPROD.../0/CApM0CwjmxY
We raced several times, and the outcome was almost always the same. I would be ahead by a car or a car half..
pretty fast S if he has traction.
My car
2007 C6 Z06
ARH headers,
Kb intake
Street bully Cam from Quality motorsports in Texas
160' Tstat.
vette air.
tune
520rwhp/480rwtq.
Will race again hopefully after I get more mods done.
here is the vid of him vs the other C6Z
http://www.youtube.com/watch?v=h4-jbwdXK90
In my vid, there was some traffic.
http://www.youtube.com/user/RSKYPROD.../0/CApM0CwjmxY
We raced several times, and the outcome was almost always the same. I would be ahead by a car or a car half..
pretty fast S if he has traction.
My car
2007 C6 Z06
ARH headers,
Kb intake
Street bully Cam from Quality motorsports in Texas
160' Tstat.
vette air.
tune
520rwhp/480rwtq.
Will race again hopefully after I get more mods done.
#7
Teching In
Thread Starter
Join Date: Aug 2006
Location: hawaii
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
The weird thing is he wanted to start really slow.. I though 50-55ish was ok.. but we slowed all the way down to 40 on the freeway via me trying to match his speed. I would have thought he'd want to start at a little higher mph with a higher rpm. I should have started in 1st if I had known we were going to be starting in 40. but I started each run in 2nd.
I'm not sure about his mods.. But I think his engine is stock.
I'm not sure about his mods.. But I think his engine is stock.
Trending Topics
#8
S2000s have forged internals from the factory, they're pretty stout.
To run a lot of boost on pump gas, generally they lower the compression via a thicker headgasket.
To run a lot of boost on pump gas, generally they lower the compression via a thicker headgasket.
#14
Teching In
Thread Starter
Join Date: Aug 2006
Location: hawaii
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
#15
#18
Teching In
Thread Starter
Join Date: Aug 2006
Location: hawaii
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
The S2K is no joke. It is def. a fast car. I would need to do a few more mods to walk him out.. but for him to even be close to me is pretty nuts! props were props are due!
#20
On The Tree
iTrader: (2)
Join Date: Oct 2010
Location: Waffle Land
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
This one has the F20c motor:
http://www.youtube.com/watch?v=EHIQ5umsn7w
This one has a 2JZ-GTE on E85 in it:
http://www.youtube.com/watch?v=Td5YZMkkGPU
Those were some good race vids BTW.