*VID* turbo 5.3 3rd gen, G8 GT, 347 stroker 95 cobra, saleen S281, and more
#1
TECH Apprentice
Thread Starter
iTrader: (20)
Join Date: Jul 2009
Location: Liberal land
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
*VID* turbo 5.3 3rd gen, G8 GT, 347 stroker 95 cobra, saleen S281, and more
Just finished my latest roll racing vid. Thoughts and comments welcome. Car mods are listed in vid as well.
By the way, some of you remember the red 95 cobra with the built 347 from the last vid getting his clock cleaned by my brother's GTO...he makes another appearance in this vid with the car back where it should be!
http://www.youtube.com/watch?v=FpFYG...ature=youtu.be
By the way, some of you remember the red 95 cobra with the built 347 from the last vid getting his clock cleaned by my brother's GTO...he makes another appearance in this vid with the car back where it should be!
http://www.youtube.com/watch?v=FpFYG...ature=youtu.be
#2
Teching In
Join Date: Jul 2012
Location: Massachusetts
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Great video man, all awesome cars, even the Regal! I have to make the drive from Worcester one of these days and join the fun, but I'm not sure if there's anyone slow enough for me
Your TA is sweet, can you run more than 11 psi on it?
Your TA is sweet, can you run more than 11 psi on it?
#3
TECH Enthusiast
Awesome video man!! Good runs/footage and great editing!
Whats up with the 5 psi on the T/A? Is that what it made 568rwhp on? You need to turn that hoe up!! Its got a lot of potential... Awesome build on it.
Whats up with the 5 psi on the T/A? Is that what it made 568rwhp on? You need to turn that hoe up!! Its got a lot of potential... Awesome build on it.
#4
TECH Apprentice
Thread Starter
iTrader: (20)
Join Date: Jul 2009
Location: Liberal land
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
The 5 PSI was when I first got the car on the road. It was a crappy base tune that had no timing. It made 400 rwhp as it sat like that with 5 psi. The 563 rwhp was at 11 PSI. And thanks for the good words!
#5
TECH Fanatic
iTrader: (6)
Join Date: Sep 2008
Location: DSM
Posts: 1,433
Likes: 0
Received 0 Likes
on
0 Posts
Regal by a... ohh...
Does your brother have any future plans with that 3rd gen?
Poor Mustang, H/C and barely outrunning GTO
Here is a vid of my buddy's budget LQ4 w/ the on3 76mm build I told you about
Does your brother have any future plans with that 3rd gen?
Poor Mustang, H/C and barely outrunning GTO
Here is a vid of my buddy's budget LQ4 w/ the on3 76mm build I told you about
#6
Teching In
Join Date: Jul 2012
Location: Massachusetts
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man! I could probably get away with 13ish PSI on pump gas, but I didn't want to blow it up the first summer I had it on the road lol. I plan on adding a few more pounds of boost next summer and seeing what it'll do. And I'm sure we could find somebody for you to run!
I'm stock, let me know if there are any 13.5-14 sec cars around!
Last edited by 92Vette; 12-30-2012 at 01:39 PM.
#7
Teching In
iTrader: (4)
Join Date: Nov 2012
Location: Mexico
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
^^Badass camaro! I do have future plans for my third gen, but as everything, time and money. This past summer was the first that I got it on the road after the 5.3 swap, so I was just happy to drive it. It essentially had a stock tune in it, and was never retuned after the Z06 cam because I planned to do more. At this point I'm leaning towards a H/C LQ4, but time will tell.
Trending Topics
#9
TECH Fanatic
iTrader: (6)
Join Date: Sep 2008
Location: DSM
Posts: 1,433
Likes: 0
Received 0 Likes
on
0 Posts
^^Badass camaro! I do have future plans for my third gen, but as everything, time and money. This past summer was the first that I got it on the road after the 5.3 swap, so I was just happy to drive it. It essentially had a stock tune in it, and was never retuned after the Z06 cam because I planned to do more. At this point I'm leaning towards a H/C LQ4, but time will tell.
But yeah, friend is very happy with his setup. At first he was very reluctant to do a turbo build and just wanted to do a cam/spray LQ4. He ended up getting a few good strokes of luck in the used parts market and decided to pull the trigger
#10
Regal by a... ohh...
Does your brother have any future plans with that 3rd gen?
Poor Mustang, H/C and barely outrunning GTO
Here is a vid of my buddy's budget LQ4 w/ the on3 76mm build I told you about
http://www.youtube.com/watch?v=ovHWR2Xzkq0
http://www.youtube.com/watch?v=Epka37stN9k
Does your brother have any future plans with that 3rd gen?
Poor Mustang, H/C and barely outrunning GTO
Here is a vid of my buddy's budget LQ4 w/ the on3 76mm build I told you about
http://www.youtube.com/watch?v=ovHWR2Xzkq0
http://www.youtube.com/watch?v=Epka37stN9k
#11
TECH Apprentice
Thread Starter
iTrader: (20)
Join Date: Jul 2009
Location: Liberal land
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
I don't have meth injection, and my tuner hates it. I'd love to make good power on pump gas only, but there is a price to pay if you get a bad batch of gas! Technically yes, you can run more boost on meth...but meth systems can have problems of their own too.
#12
awesome video RJ. Shoot me a text next time before making one, ive got loads of video footage from this season i could let you use. Im just too lazy lately to make my own. Cant wait till spring time man, maybe if we get some good mid winter weather we can all meet up. Hows the TA doing?
#13
TECH Apprentice
Thread Starter
iTrader: (20)
Join Date: Jul 2009
Location: Liberal land
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
awesome video RJ. Shoot me a text next time before making one, ive got loads of video footage from this season i could let you use. Im just too lazy lately to make my own. Cant wait till spring time man, maybe if we get some good mid winter weather we can all meet up. Hows the TA doing?
#14
i hear ya... i do the same thing. Go out into the garage and wax it for no apparent reason. Only time i drive it, is to and from the shop to install new parts. Next season is going to be a fun one. I look forward to seeing that thing race some fast cars. That and quickshifts GTO.
#15
TECH Fanatic
iTrader: (6)
Join Date: Sep 2008
Location: DSM
Posts: 1,433
Likes: 0
Received 0 Likes
on
0 Posts
May not have had the volume up all the way, but it looked like the GTO let off shortly after the Mustang pulled around him.
Not sure off the top off my head. I will ask him and get back to you. He is on E85
Not sure off the top off my head. I will ask him and get back to you. He is on E85
#17
Teching In
iTrader: (4)
Join Date: Nov 2012
Location: Mexico
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Made 401 on Dez racings dynojet I believe.
#18
That's correct. I was nearing the top of 4th, so let out. He was about 1.5 cars ahead at that point. Both of our cars trapped 91mph in the 1/8th, but his trapped 117 in the quarter to my 114. Race went down exactly how I pictured.
Made 401 on Dez racings dynojet I believe.
Made 401 on Dez racings dynojet I believe.
#19
Teching In
iTrader: (4)
Join Date: Nov 2012
Location: Mexico
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Yea, the car runs well. Went 11.9 @ 117 on slicks. Not sure on weight, but he does have a full tubular setup (k member, a arms, coilovers). I'm no mustang pro, but it's got to be in the 3300lb range. Pretty sure it has 3.73s too. Don't know exact motor specs, but it's a fully built 347. Trick flow aluminum heads, higher lift rockers...etc.
#20
Yea, the car runs well. Went 11.9 @ 117 on slicks. Not sure on weight, but he does have a full tubular setup (k member, a arms, coilovers). I'm no mustang pro, but it's got to be in the 3300lb range. Pretty sure it has 3.73s too. Don't know exact motor specs, but it's a fully built 347. Trick flow aluminum heads, higher lift rockers...etc.