400 whp 5.0 Mustang vs few LS1 camaro's
#341
#342
This car thing is a hobby to me man. I do it for the adrenaline rush and fun. I dontblike talking trash back and forth with people.. I just like hanging out with fellow car nuts and talking cars. I couldn't care less if its Ford, GM, Chrysler or Honda. Are there cars I would like to race and win? Sure! Thats what makes all this fun to me.
#343
10 Second Club
iTrader: (8)
A blower car will lose a TON with warm weather not sure where you guys get this idea that a boosted car isn't effected by the weather as much as a N/A car...
There was no Ice at the track at all with this car.
If you had my boost (Twin screw) and I had your cubes think it might not turn out like you think
There was no Ice at the track at all with this car.
If you had my boost (Twin screw) and I had your cubes think it might not turn out like you think
NO ice.....that's a first.....bet you had long cool downs though. That's got to be great fun making 1 run a hour....lmao **** I get bored if I can't make 4 runs in 15 min.
That would be physics…
Let the record reflect that NO ONE has said that Forced induction is not effected by DA. What has accurately been declared, is that Forced Induction will outperform (in terms of efficiency) Normally Aspirated setups in all density altitudes.
Let me be clear: It is LUDICROUS to claim that forced induction engines are equally effected by light air… such a position merely defines the personification of ignorance, on the subject. Read a frickin' book, will ya?
That you have a teeeeeny-tiny little engine sitting under that blower, is not the fault of those with real cubes.
Suffice it to say that if the larger cubed engine were to induce to the same level as your setup, you'd be toast by the margin represented in the distinction… without regard for the DA.
Let the record reflect that NO ONE has said that Forced induction is not effected by DA. What has accurately been declared, is that Forced Induction will outperform (in terms of efficiency) Normally Aspirated setups in all density altitudes.
Let me be clear: It is LUDICROUS to claim that forced induction engines are equally effected by light air… such a position merely defines the personification of ignorance, on the subject. Read a frickin' book, will ya?
That you have a teeeeeny-tiny little engine sitting under that blower, is not the fault of those with real cubes.
Suffice it to say that if the larger cubed engine were to induce to the same level as your setup, you'd be toast by the margin represented in the distinction… without regard for the DA.
How about you show me the fastest stock heads/block ls and I will show you the fastest stock block/heads 4v. This should not be a problem because ls is so superior to the older 4vs Also before you start your n/a bs n/a 5.4 4v > 5.7 ls. They have made more power and have been faster down the track. Without cubes and aftermarket support they can't compete when **** gets serious. Your car is not a lsx marvel man it took a lot to do what it does and it still runs 11s. Since that's how you judge my car . Inb4escuses.
B: Do you ever get tired of looking the fool and posting this dumb ****. Your car should run 9's in reverse if ANYTHING you say were true.
He hasn't even been in the 11's.
#344
10 Second Club
iTrader: (8)
This car thing is a hobby to me man. I do it for the adrenaline rush and fun. I dontblike talking trash back and forth with people.. I just like hanging out with fellow car nuts and talking cars. I couldn't care less if its Ford, GM, Chrysler or Honda. Are there cars I would like to race and win? Sure! Thats what makes all this fun to me.
#345
12 Second Club
iTrader: (3)
Well I'm not an expert on the subject but doesn't a lot of that have to do with design? IATs, intercooler? Poor setups/safe suffer in the same conditions from run to run and others are tuned to pull timing in the name of safety (warranty) so that's fair with some s/c applications but not all.
#346
10 Second Club
iTrader: (8)
Well I'm not an expert on the subject but doesn't a lot of that have to do with design? IATs, intercooler? Poor setups/safe suffer in the same conditions from run to run and others are tuned to pull timing in the name of safety (warranty) so that's fair with some s/c applications but not all.
#347
10 Second Club
iTrader: (14)
YOU CAN"T GET TO THESE CUBES DUDE!!!!!!!!!!!! Why do you keep saying that? That is the restriction of your little 4.6....YOU CAN"T GET THERE....forget about it......but I could go boosted if I wanted. This alone is why the ls platform is better.
NO ice.....that's a first.....bet you had long cool downs though. That's got to be great fun making 1 run a hour....
NO ice.....that's a first.....bet you had long cool downs though. That's got to be great fun making 1 run a hour....
And I could motor swap my car and get those cubes....Motor swapping a car is in your territory So shouldn't be a big deal when comparing set ups there are mod motor with your cubes....
Then "all will be equal" like you keep saying over and over again. For the money the LS platform can't be beat but give credit where it is due.
#348
Actually they put ls6's in 69 02 Camaro's. They called it the ZL1. it's not really a swap....more of a replacement. I can post pics of a real swap for you.
So you admit that a boosted ls6 would flat wipe the floor with the modular stuff. You might know something after all.
Check out the boosted section on here......those guys really struggle keeping those ls engines together under boost The biggest problem is using a pcm not designed for boost. The engine really don't care. But I'm sure you knew that......actually you didn't.
So you admit that a boosted ls6 would flat wipe the floor with the modular stuff. You might know something after all.
Check out the boosted section on here......those guys really struggle keeping those ls engines together under boost The biggest problem is using a pcm not designed for boost. The engine really don't care. But I'm sure you knew that......actually you didn't.
The REALLY quick cars on here are using iron blocks or pure race stuff, not LS1 or 6's, let along stock internal versions. They're not even using stock cranks or heads. For all you knock the 4.6L, which is by no means my favorite engine, you only dream of your F-body being as capable overall.
#349
10 Second Club
iTrader: (8)
30-45 min cool downs depending on staging lanes
And I could motor swap my car and get those cubes....Motor swapping a car is in your territory So shouldn't be a big deal when comparing set ups there are mod motor with your cubes....
Then "all will be equal" like you keep saying over and over again. For the money the LS platform can't be beat but give credit where it is due.
And I could motor swap my car and get those cubes....Motor swapping a car is in your territory So shouldn't be a big deal when comparing set ups there are mod motor with your cubes....
Then "all will be equal" like you keep saying over and over again. For the money the LS platform can't be beat but give credit where it is due.
You crack me up... Show me ANY non big block LS6 keeping up with the top 50 or so quickest Mustangs... Hell, the top 100... You're only kidding yourself thinking that adding a blower will do the trick. You're engine will SHATTER about 1,000hp shy of the needed goal and that's the truth of the matter. The ECM plays no role in how strong a block is anymore than the engine cares when it blows up.
The REALLY quick cars on here are using iron blocks or pure race stuff, not LS1 or 6's, let along stock internal versions. They're not even using stock cranks or heads. For all you knock the 4.6L, which is by no means my favorite engine, you only dream of your F-body being as capable overall.
The REALLY quick cars on here are using iron blocks or pure race stuff, not LS1 or 6's, let along stock internal versions. They're not even using stock cranks or heads. For all you knock the 4.6L, which is by no means my favorite engine, you only dream of your F-body being as capable overall.
#350
10 Second Club
iTrader: (14)
You still can't get to the cubes w/o stroking and boring. Then I get to stroke and bore.....that's fair. You can never get there. I'm about to motor swap it....be it a mild swap when I put the ls7 in. The 6 is really a replacement.
Wtf are you talking about. You put your money where your mouth is when you bought a girl car.....now
Wtf are you talking about. You put your money where your mouth is when you bought a girl car.....now
Hates raggedy ferds
But keeps ferd in his Fox because it "Looks cool" and makes him not biased because he has a Mustang and A Camero
I'm on a GM site and should only expect this but the uproar of GM owners on SVTP makes it hard to tell these 2 sites apart...... And Ford guys are trolls
#352
Teching In
Join Date: May 2013
Location: Charlotte, NC
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Hates raggedy ferds
But keeps ferd in his Fox because it "Looks cool" and makes him not biased because he has a Mustang and A Camero
I'm on a GM site and should only expect this but the uproar of GM owners on SVTP makes it hard to tell these 2 sites apart...... And Ford guys are trolls
But keeps ferd in his Fox because it "Looks cool" and makes him not biased because he has a Mustang and A Camero
I'm on a GM site and should only expect this but the uproar of GM owners on SVTP makes it hard to tell these 2 sites apart...... And Ford guys are trolls
#353
10 Second Club
iTrader: (14)
Not sure if I'd call it a Mustang but yes a 4.6L has been faster down the 1/4 mile than any LSx
Not sure why everyone jumps to " records" when comparing motors though like anyone here knows what kinda time and research goes into making a car go low 6s....whether it be LSx Mod , SBF, SBC etc ......
Not sure why everyone jumps to " records" when comparing motors though like anyone here knows what kinda time and research goes into making a car go low 6s....whether it be LSx Mod , SBF, SBC etc ......
#354
Not sure if I'd call it a Mustang but yes a 4.6L has been faster down the 1/4 mile than any LSx
Not sure why everyone jumps to " records" when comparing motors though like anyone here knows what kinda time and research goes into making a car go low 6s....whether it be LSx Mod , SBF, SBC etc ......
Not sure why everyone jumps to " records" when comparing motors though like anyone here knows what kinda time and research goes into making a car go low 6s....whether it be LSx Mod , SBF, SBC etc ......
#356
YOU CAN"T GET TO THESE CUBES DUDE!!!!!!!!!!!! Why do you keep saying that? That is the restriction of your little 4.6....YOU CAN"T GET THERE....forget about it......but I could go boosted if I wanted. This alone is why the ls platform is better.
NO ice.....that's a first.....bet you had long cool downs though. That's got to be great fun making 1 run a hour....lmao **** I get bored if I can't make 4 runs in 15 min.
This
I'd like to know where they found a Mustang in 85 that ran a 14.3 bone stock carberated. If that's the case all foxes slowed in the following years.
A: I never said 2.3......it would be stupid to even think it would work right.
Then what was your point a bigger more efficient blower can make more power on a ls6?
B: Do you ever get tired of looking the fool and posting this dumb ****. Your car should run 9's in reverse if ANYTHING you say were true.
Nice deflection derp. Stuck in the 11s with a racecar. I want a camero so I can get my **** pushed in by multiple bus lengths against bolton gtrs
He hasn't even been in the 11's.
NO ice.....that's a first.....bet you had long cool downs though. That's got to be great fun making 1 run a hour....lmao **** I get bored if I can't make 4 runs in 15 min.
This
I'd like to know where they found a Mustang in 85 that ran a 14.3 bone stock carberated. If that's the case all foxes slowed in the following years.
A: I never said 2.3......it would be stupid to even think it would work right.
Then what was your point a bigger more efficient blower can make more power on a ls6?
B: Do you ever get tired of looking the fool and posting this dumb ****. Your car should run 9's in reverse if ANYTHING you say were true.
Nice deflection derp. Stuck in the 11s with a racecar. I want a camero so I can get my **** pushed in by multiple bus lengths against bolton gtrs
He hasn't even been in the 11's.
#357
Wtf are you talking about. You put your money where your mouth is when you bought a girl car.....now
You have no credibility here, KID... You're another punk on the net... another rebel without a clue... another wannabe.
If you had any idea what you were talking about here, you'd shut up. I'll give you a hint...
Not sure if I'd call it a Mustang but yes a 4.6L has been faster down the 1/4 mile than any LSx
Not sure why everyone jumps to " records" when comparing motors though like anyone here knows what kinda time and research goes into making a car go low 6s....whether it be LSx Mod , SBF, SBC etc ......
Not sure why everyone jumps to " records" when comparing motors though like anyone here knows what kinda time and research goes into making a car go low 6s....whether it be LSx Mod , SBF, SBC etc ......
#358
I only bring up that facts when your brother spews his bs. It has nothing to do with my car. However when you have no reply to the truth it's always nice to fall back on. Since we are most likely miles apart and will never run