Street Racing & Kill Stories Basic Technical Questions & Advice

700+rwhp Viper VS. My Sprayed Mach1

Thread Tools
 
Search this Thread
 
Old 11-09-2006 | 03:26 PM
  #1  
dan03mach's Avatar
Thread Starter
9 Sec. Club!!!
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,492
Likes: 0
Received 0 Likes on 0 Posts
From: HEB TX
Default 700+rwhp Viper VS. My Sprayed Mach1

This was the first race I have gotten into since I put a built shortblock in my car and I also put a completely different Nitrous set up on it too, but I still have the stock heads and cams that are came in the car.. I was spraying a 250 shot and the Viper has a 522CI Stroker motor, Heads, Cams, ETC. Owner said it put down around 720rwhp on motor.. He also has a 250 shot but didn't use it. Here is the vid. We started at around a 55 roll till about 130 mph where I let out due to running out of gears.. I have 4.10's.. I pulled a little bit untill I ran out of gear and let off then he flys past me.. Damn I wish I had my 3.73's back in...

[thumb]http://i123.photobucket.com/albums/o295/98RaptorTA/th_DanVsViper2.jpg[/thumb]

Last edited by dan03mach; 11-09-2006 at 03:35 PM.
Old 11-09-2006 | 03:30 PM
  #2  
MeentSS02's Avatar
Kleeborp the Moderator™
iTrader: (11)
 
Joined: Mar 2004
Posts: 10,316
Likes: 0
Received 3 Likes on 3 Posts
From: Dayton, OH
Default

Wow...pretty strong set of cars in that video...thanks for sharing!
Old 11-09-2006 | 03:37 PM
  #3  
uno's Avatar
uno
On The Tree
 
Joined: Sep 2006
Posts: 121
Likes: 0
Received 0 Likes on 0 Posts
Default

wow both nice cars. I know one of you all ran one of the bikes didn't ya?
Old 11-09-2006 | 04:15 PM
  #4  
99Z28LS1's Avatar
TECH Fanatic

iTrader: (4)
 
Joined: Mar 2004
Posts: 1,886
Likes: 0
Received 0 Likes on 0 Posts
From: San Antonio
Default

wow. i remember reading about your car. i dont really like mustangs but damn your is fast as ****, so i got to give props where its due
+1
Old 11-09-2006 | 04:47 PM
  #5  
00firebird's Avatar
TECH Fanatic

iTrader: (3)
 
Joined: Dec 2004
Posts: 1,005
Likes: 0
Received 0 Likes on 0 Posts
From: MI
Default

nice kill, that guy needs to improve his driver mod though he drops every time he tries to shift and looks like hes about to bottom out
Old 11-09-2006 | 04:58 PM
  #6  
I <3 80057's Avatar
Banned
iTrader: (1)
 
Joined: Apr 2004
Posts: 614
Likes: 0
Received 0 Likes on 0 Posts
From: Desoto, Tx
Default

Nice run Dan!
Old 11-09-2006 | 05:22 PM
  #7  
GoneN3's Avatar
Teching In
 
Joined: Aug 2006
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
From: Ft Lauderdale,Fla
Default

Good Race. Great Video. I'd be happy if i was you. Try him again with heads,cam and 3.73 or taller gears................all it takes is money right??
Old 11-09-2006 | 05:23 PM
  #8  
dan03mach's Avatar
Thread Starter
9 Sec. Club!!!
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,492
Likes: 0
Received 0 Likes on 0 Posts
From: HEB TX
Default

Originally Posted by GoneN3
Good Race. Great Video. I'd be happy if i was you. Try him again with heads,cam and 3.73 or taller gears................all it takes is money right??
Yeah, untill he sprays me with that 250 shot of his.. LOL
Old 11-09-2006 | 05:38 PM
  #9  
2001z's Avatar
Banned
iTrader: (32)
 
Joined: Mar 2005
Posts: 1,157
Likes: 0
Received 0 Likes on 0 Posts
From: Fountain Inn, SC
Default

man both of those cars move out fast !! Looks like your mach is really quick
Old 11-09-2006 | 05:51 PM
  #10  
usd2sing's Avatar
10 Second Club
iTrader: (15)
 
Joined: Feb 2005
Posts: 611
Likes: 0
Received 0 Likes on 0 Posts
From: fort worth, tx
Default

was that brian's (bdj's) old viper?

nice pull bro.
Old 11-09-2006 | 05:54 PM
  #11  
dan03mach's Avatar
Thread Starter
9 Sec. Club!!!
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,492
Likes: 0
Received 0 Likes on 0 Posts
From: HEB TX
Default

Originally Posted by usd2sing
was that brian's (bdj's) old viper?

nice pull bro.
yep..
Old 11-09-2006 | 05:54 PM
  #12  
MillaTK's Avatar
TECH Junkie
 
Joined: Oct 2003
Posts: 3,066
Likes: 0
Received 0 Likes on 0 Posts
From: Cornwall, NY
Default

Nice run! What kind of numbers do you put down? I can't imagine too much N/A, if you are on the stock heads/cams. Any ideas what you put down with the nitrous as well?
Old 11-09-2006 | 05:58 PM
  #13  
dan03mach's Avatar
Thread Starter
9 Sec. Club!!!
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,492
Likes: 0
Received 0 Likes on 0 Posts
From: HEB TX
Default

Originally Posted by MillaTK
Nice run! What kind of numbers do you put down? I can't imagine too much N/A, if you are on the stock heads/cams. Any ideas what you put down with the nitrous as well?
On the 200 shot it put down 530rwhp & 565rwtq.. We ran out of N20 on the 250 shot so I really don't know for sure.. I would figure around 570 or so and over 600rwtq..
Old 11-09-2006 | 06:51 PM
  #14  
joewee350's Avatar
On The Tree
 
Joined: Sep 2005
Posts: 142
Likes: 0
Received 0 Likes on 0 Posts
Default

So why was the race so close if he has 150whp more than you? Nice run anyway.
Old 11-09-2006 | 07:16 PM
  #15  
dan03mach's Avatar
Thread Starter
9 Sec. Club!!!
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,492
Likes: 0
Received 0 Likes on 0 Posts
From: HEB TX
Default

Originally Posted by joewee350
So why was the race so close if he has 150whp more than you? Nice run anyway.
Because this Mach1 hauls major azz..
Old 11-09-2006 | 07:16 PM
  #16  
MillaTK's Avatar
TECH Junkie
 
Joined: Oct 2003
Posts: 3,066
Likes: 0
Received 0 Likes on 0 Posts
From: Cornwall, NY
Default

Originally Posted by joewee350
So why was the race so close if he has 150whp more than you? Nice run anyway.
Thats what I was thinking. However, the viper owner could have been BS'ing. It was from a roll, so his suspension/launch advantage isn't going to be an issue, so who knows what the deal is. Regardless it was a damn good race, though I doubt the viper had as much power as advertised.
Old 11-09-2006 | 07:20 PM
  #17  
bad95killer's Avatar
TECH Addict
 
Joined: Jul 2002
Posts: 2,906
Likes: 0
Received 0 Likes on 0 Posts
From: Somewhere I Belong
Default

Nice run Dan & you're damn lucky to ran him buddy & got it on vid

peace
Old 11-09-2006 | 07:29 PM
  #18  
dan03mach's Avatar
Thread Starter
9 Sec. Club!!!
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,492
Likes: 0
Received 0 Likes on 0 Posts
From: HEB TX
Default

Originally Posted by MillaTK
Thats what I was thinking. However, the viper owner could have been BS'ing. It was from a roll, so his suspension/launch advantage isn't going to be an issue, so who knows what the deal is. Regardless it was a damn good race, though I doubt the viper had as much power as advertised.
I know the old owner of the viper and it put down 650rwhp when he had it. There is no telling what the new owner have done to it.. But I do no it was making at least 650rwhp but the new ower said he put down over 700 so I'm just going by what he said..
Old 11-09-2006 | 08:34 PM
  #19  
Prey4Me's Avatar
On The Tree

iTrader: (2)
 
Joined: Aug 2006
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
From: Turlock,CA
Default

Originally Posted by dan03mach
I know the old owner of the viper and it put down 650rwhp when he had it. There is no telling what the new owner have done to it.. But I do no it was making at least 650rwhp but the new ower said he put down over 700 so I'm just going by what he said..
Nice vid and badass mach! Is your car full weight? Not doubting the kill, but a viper with 650whp and weighing less should of really walked away . Also the viper could have been missing the driver mod? Either way, good kill and nice mach .
Old 11-09-2006 | 08:58 PM
  #20  
dan03mach's Avatar
Thread Starter
9 Sec. Club!!!
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,492
Likes: 0
Received 0 Likes on 0 Posts
From: HEB TX
Default

Yes my Mach is alot lighter then a normal Mach1.. My race weight is around 3100lbs but I wasn't at race weight. I still had all my seats in and heavy rims.. on..both cars had a passenger too..


Quick Reply: 700+rwhp Viper VS. My Sprayed Mach1



All times are GMT -5. The time now is 11:05 PM.